ZEB-BASSO 100 4.1 Speaker
Contents
ZEB-BASSO 100 4.1 Speaker
User Manual
www.zebronics.com
Dear Customer,
Thank you for purchasing the ZEB-BASSO 100 4.1 Speaker. Please read the user manual carefully before usage & save it for future reference.
Note:
- Avoid the usage of this speaker at the high temperature and high humidity environment.
- Avoid the self-disassembly of the product asitresultsin the failure of Warranty.
- Please turn off the power and pull out the plug, when the speaker is notin use.
Features
4.1 Channel Speaker
Wireless BT /USB/FM/AUX
LED Display
Remote Control
11.43 cm Subwoofer Drive
RGB Ring Light
Elegant Design
Wall Mountable
Specifications
Output power (RMS)
| Subwoofer | : 130w |
| Satellite | : 12Wx 4 |
| Total | : 78W |
Driver size
| Subwoofer | : 11.43cmx1 |
| Satellite | : 17.62cm × 4 |
Impedance
| Subwoofer | : 14 Ω |
| Satellite | : 14 Ω |
| Frequency response | : 20Hz – 20kHz |
| S/N Ratio | : ≥ 55dB |
| Separation | : ≥ 35dB |
| File format support (USB) | : MP3 |
| Line input | : 2ch RCA |
| Max. supported memory size (USB) | : 32GB |
| FM frequency range | : 88 MHz-108 Mhz |
| BT name | : ZEB-BASSO 100 4.1 |
| BT version | : 5.1 |
Product dimension (W x D x H)
| Subwoofer | : 160 × 300 × 260 mm |
| Satellite | : 105 × 90 × 205 mm |
Net. weight
| Subwoofer | : 3.495 Kg |
| Satellite | : 535 g × 4 |
| Total | : 5.6 Kg |
Package Content
| Subwoofer | : 1U |
| Satellite | : 4U |
| Input cable | : 1U |
| Remote | : 1U |
| QR code guide | : 1U |
Control Description
- VOLUME/BASS/ TREBLE CONTROL KNOB
Volume Control: To adjust volume level
BASS Control: To adjust Bass level
Treble Control: To adjust Treble level - INPUT MODE (AUX/BT/FM/USB)
- LEDDISPLAY
- PREV/FMCHANNEL-
- USBPORT
- PLAY / PAUSE / SCAN
- NEXT/FM CHANNEL+
Back Panel
Remote Control
Power: standby ON/OFF
Numeric Pad( 0-9): To select particular track from USB drive directly or to enter FM Channel frequency directly
Vol +: To increase the volume
Prev: To select the previous tracks in BT/USB or to Tune in FM mode
Vol-: To decrease the volume
RPT: To Switch between available repeat modes
Scan: Toscan all FM channels available
Mode: Mode Selection (BT/AUX/USB/FM)
EQ: Short press to control BASS and short Press again to control TREBLE. Long Press to use Equalizer
Play/Pause To Play/Pause the currenttrack. To switch next channel in FM mode
Next: To select the next tracks in BT/USB or to Tune in FM mode
Mute To Mute/Unmute
General Instructions
BT Mode:
Switch the source to BT mode, scan for nearby BT devices on your device. Tap on “ZEB- BASSO 100 4.1” to connect.
USB Mode:
Insert the USB drive to the slot provided on the subwoofer. It will detect the USB and the audio files from drive will be played automatically.
FM Radio:
Switch the source to FM mode. Press the scan button in the remote or control Panel to scan the available FM channels. Once the scanning is done, the first scanned channel will begin to play. Use “Play/Pause” button to go to next channel.
AUX-IN:
The device can be connected to an audio device using an 2 Channel RCA to 3.5mm cable.
Connect the one end of the cable to the speaker and the other end to an audio source.
The songs from the audio source can be heard through the speaker.
ISO 9001:2015 Certified Company
www.zebronics.com