YEELIGHT Wireless Smart Dimmer User Manual

YEELIGHT Wireless Smart Dimmer

Learn more at www.yeelight.com
Customer service: [email protected]
Manufacturer: Qingdao Yeelink Information Technology Co., Ltd.
Address: 10-B4, Bldg. B, Qingdao International Innovation Park, No.1 Keyuanweiyi Rd. Laoshan District, Qingdao, Shandong, P.R.China 266000

Product Description

Setup Instructions

1. Put a battery inside the dimmer before use. Battery model is recommended in Parameters.
2. Keep the dimmer in the same room with Yeelight device, turn on the device, and press Paring button for more than 3s. Indicator keeps flashing during paring. The device will send out signal when paring is completed.
3. Installation:
   Method A: Remove the adhesive tapes and stick the dimmer in the desired position.
   Please ensure the pasted position is clean and dry.
4. Method B:
   Strip off the hook of the hook & loop on the back of the dimmer and put it in the desired position.

How to Unpair

1. Open Yeelight App, choose the Yeelight device you want to unpair from the dimmer
2. Click “Remote controller and switch”, and choose the dimmer and slide to the left to delete it.

Functionalities

1. Rotary knob
   1. Tap: Turn on/off Yeelight device
   2. Rotate: Dim the light
   3. Long press: Change the color of ambience light (if applicable to the device)
   4. Tap+Rotate: Adjust color temperature
   5. Double-tap: Daylight/Moonlight modes switch
2. Indicator
   1. The indicator will flash during pairing.
   2. When you use the dimmer to control Yeelight device, indicator will flash for each command.
3. Pairing button
   1. Within one minute after Yeelight device is powered on, press Pairing button for 3s. Indicator keeps flashing during Pairing. The device will send
   2. Out signal when Pairing is completed.
   3. When the paired Yeelight device is in failure, turn off the phycial switch and reset the device.

Parameters

Safety Precautions

1. When the dimmer is in low battery, please replace the battery in time.
   To change the battery, it is recommended to open the back cover of the dimmer by slotted screwdriver
2. Using battery in different model may damage or cause safety hazard to the dimmer.
3. Kids are not allowed to use the dimmer privately in case they will eat the battery.
4. If you will not use the dimmer over a long period of time, please take out the battery.

EU Declaration of Conformity
Qingdao Yeelink Information Technology Co., Ltd. hereby declares that the Yeelight Smart LED Filament Bulb is in compliance with the essential requirements and other relevant provisions of Radio Equipment
Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following address: Yeelight Germany GmbH, Flurweg 11 82402 Seeshaupt.

WEEE Disposal and Recycling

Correct Disposal of this product. This marking indicates that this product should not be disposal with other household wastes throughout the EU.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, rescycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.