Yealink MSpeaker II Video Conferencing Soundbar User Guide
Contents
Package Contents
- MSpeaker Ⅱ
- (116.16 mm * 166.41 mm)
Wall Mount Bracket
- Expansion screws and Self-tapping screws
- (3.5 m, 11.48 ft)
Power Adapter (48V/0.7A)
- (3m, 9.84ft)
3.5mm Audio Cable
- (φ38*T1.2mm)
Silicone Pad×2
- Quick Start Guide
We recommend that you use the accessories provided or approved by Yealink. The use of unapproved third-party accessories may result in poor performance.
MSpeaker Ⅱ Connection
- Connect the MSpeakerⅡvia 3.5mm audio cable
Connect the MSpeakerⅡto the Line Out port of the video conference system or the UVC series camera as an audio output device. The following is an example of connecting to the UVC80.
- Connect the MSpeakerⅡvia Ethernet cable
Connect the MSpeakerⅡto the VCH/Phone port of the VC880/VC800/VC500 video conference system as an audio output device. The following is an example of connecting to the VC800.
CAT5e or higher ethernet cable.
MSpeaker Ⅱ Installation
- Mount on a Wall
Horizontal installation
Vertical installation
LED Indicator Instructions
LED Status: Description
Off: The device is powered off.
Solid green: The device is active
Fast-flashing green: The device is pairing Bluetooth
Slowly-flashing green: The device connects to Bluetooth successfully
Red and green flashing alternately for 2s: The device is in initialling.
