FLOBUDS 200 Truly Wireless Earbuds
User Manual
Contents
FLOBUDS 200 Truly Wireless Earbuds
INTRODUCTION
Wings is India’s fastest growing audio, smart watches and accessories brand catering to the youth. Wings was recognized as the most Prestigious Rising Brand Of Asia 2021-2022 by BARC Asia in the gaming lifestyle accessories category.
Wings is on a mission to create a pop culture led brand that the youth is proud to own and Nod win, a subsidiary of Nazari Technologies, has a strategic investment in alignment with the long term vision.
But before you dive right in, we strongly recommend going through this user manual thoroughly as it contains important technical information to ensure you have a seamless audio experience with us. After you’re done with reading the manual, get ready to go to the next level with Wings !
WHAT’S IN THE BOX
| 2 N Pairs of Extra Ear Tips(S&L) | |
| 1N User Manual | |
| 1N Warranty Card | |
| 1N Type-C Charging Cable |
PRODUCT LAYOUT 
- Charging Case Led Indicator
- Earbud LED Indicator
- Touch Control
- Type C Charging Port
- Microphone
HOW TO PAIR 
Please make sure that the device is fully powered before using the product.
Step 1: Make sure your case is charged up. Open the lid of the case and take out the earbuds. The earbuds will turn ON and automatically enter the pairing mode, and the Left earbud LED will flash quickly.
Step 2: Tap “Flobuds 200” from the smartphone’s Bluetooth menu. There is a ring prompt after a successful connection. This indicates that the earbuds are successfully connected to your device.
Step 3: Congratulations! You are now connected and can start playing media.
Note: If you do not connect to any device within 180 seconds of entering pairing mode, then both earbuds will automatically turn OFF. Please put the earbuds back into the case and repeat the process to pair.
TAP CONTROL USAGE 
| BASIC FUNCTION | LEFT EARBUD | RIGHT EARBUD | TOUCH CONTROLS |
| Volume Increase |  |
Single Tap on the right earbud’s touch sensor |
|
| Volume Decrease | |
Single Tap on the left earbud’s touch sensor | |
| Play/Pause Music |  |
Double Tap on any earbud’s touch sensor | |
| Next Track | |
Triple Tap on the right earbud’s touch sensor | |
| Previous Track |  |
Triple Tap on the left earbud’s touch sensor | |
| Voice Assistant |  |
Long Press for 2 seconds on the left earbud’s touch sensor | |
| Game Mode ON/OFF | |
Long Press for 2 seconds on the right earbud’s touch sensor | |
CALL CONTROLS
| CALLING FUNCTION | LEFT / RIGHTEARBUD | TOUCH CONTROLS |
| Answer Incoming Call | |
Double Tap on any of the earbud’s touch sensor |
| Hang up ongoing call | |
While on call, Double Tap on any earbud’s touch sensor |
| Reject incoming call | |
Long Press for 2 seconds on any earbud’s touch sensor |
CHARGING THE CASE
Earbuds Low Battery: Earbuds will play a jingle when the buds are low on power.
Earbuds Charging: When earbuds are placed inside the charging case, the LED light on the earbuds will turn ON indicating that the earbuds are being charged.
Earbuds Completely Charged: When the earbuds are completely charged, the LED Light on the earbuds will go OFF.
RESET TING THE DEVICE
Please follow the below steps when you see two “Flours 200” in your Bluetooth device menu on your mobile, or you can hear music through only one earbud. This means the left and right earbuds have not auto-paired with each other:
Step 1: Disconnect the earbuds and remove “Flours 200” from your mobile list of paired devices.
Step 2: Tap five times quickly to clear the pairing data on either of the earbuds. The LED light on both earbuds will blink three times simultaneously to show the process is completed.
Step 3: Put them back into the charging case, and “Roboids 200” is ready to use. They will automatically switch on and pair instantly as well.
The Reset process is now complete and you will be able to hear music through both earbuds.
TECHNICAL SPECIFICATIONS
| PARAMETERS | VALUES |
| Bluetooth Version: | V5.3 |
| Effective Distance: | 15rn |
| Impedance: | 320 |
| Product Weight: | 44g |
| Speaker Size: | 13mm |
| Total Ray Time: | Up to 50 Hours |
| Earbuds Ray Time: | Up o 10 Hours |
| Talk Time: | Up to 45 Hours |
| Standby Time: | Up to 300 Hours |
| Complete Charging Time. | 1.5 Hours |
| Earbuds Charging lime: | 1 Hour |
| Rated Input: | 5V/1A |
| Frequency. | 2OHz-2OKHz |
| Water and Sweat Resistant: | IPXS |
| Charging Port: | Type-C |
SAFETY & MAINTENANCE
Please read below suggestions in order to help prolong the product lifespan and clearly understand the warranty clauses:
- Please keep the product dry, do not put it in humid conditions to avoid a short circuit.
- Do not expose it to the peak sun or high heat for extended periods, as this will shorten the lifespan of electronic components, damage the battery and deform some plastic parts.
- Please do not put it in cold circumstances to avoid damage to the PCB board.
- Please do not attempt to dismantle the product, as it may be unsafe, especially for non-professionals.
- Do not use chemical products, detergents, or oily liquids to clean the item.
- Do not scratch the surface with sharp items to avoid damaging the case and appearance.
- Do not charge the product for more than 5 hours to avoid loss in battery life.
- Avoid hearing music at maximum volume for long periods as this can affect your hearing and is not advisable.
Note: Any damage to the product that is not a manufacturing defect will render the warranty null and void. Therefore, please take utmost care of your product.