WESTIN 2601 Control Box Relocation Bracket Instruction Manual

Home » Westin » WESTIN 2601 Control Box Relocation Bracket Instruction Manual

WESTIN logo

WESTIN 2601 Control Box Relocation Bracket

WESTIN 2601 Control Box Relocation Bracket

CONTENT

CONTENT
ITEM QUANTITY DESCRIPTION TOOLS NEEDED
1 1 CONTROL BOX BRACKET  
2 2 M6 HEX HEAD CAP SCREW  
3 2 M6 SPLIT LOCK WASHER  
4 2 M6 FLAT WASHER  
5 4 M5 HEX DRIVE SOCKET HEAD SCREW  
6 4 M5 SERRATED FLANGE HEX NUT  
ANTI-SEIZE LUBRICANT MUST BE USED ON ALL STAINLESS STEEL FASTENERS TO PREVENT THREAD DAMAGE AND GALLING

WESTIN 2601 Control Box Relocation Bracket 1

PROCEDURE

  1. Remove contents from box, verify if all parts listed are present and free from damage.
    Carefully read and understand all instructions before attempting installation.
    Failure to identify damage before installation could lead to a rejection of any claim.
  2. Attach the control box to the control box bracket (item 1) using the M5 hardware (items 5 & 6). See Figure 1.
  3. Attach the control box bracket to the vehicle using the M6 hardware (items 2- 4). See Figures 1-3.
  4. Tighten the M6 hardware to 7-8 ft-lbs.
    Note: Refer to the Cable Kit Instructions for wiring instructions.

WESTIN 2601 Control Box Relocation Bracket 2

WESTIN 2601 Control Box Relocation Bracket 3

    WARNING      
Failure to follow these instructions could lead to death, personal injury, and / or property damage.
Failure to follow these instructions could lead to death, personal injury, and / or property damage.

FASTENERS:

All Westin supplied fasteners must be utilized and installed in accordance with the installation in- structions and apply torque to the specifications as defined. DOUBLE CHECK ALL FASTENERS BEFORE INITIAL USE, AND PERIODICALLY IN THE FUTURE TO ENSURE PROPER FUNCTION AND SAFETY.

DRILLING:
Most Westin products do not require drilling for installation. If drilling is defined as required, use caution when drilling a vehicle. FAILURE TO REVIEW AN AREA TO BE DRILLED MAY RESULT IN PERSONAL INJURY AND/OR INJURY TO OTHERS AS WELL AS VEHICLE DAMAGE.

EYE PROTECTION:
ALWAYS WEAR SAFETY GLASSES OR GOGGLES DURING THE INSTALLATION PROCESS TO AVOID PERSONAL INJURY.

MAXIMUM TOWING/CARRYING CAPACITY: (if applicable)
The Westin Receiver Hitches will have a visible tow rating label affixed directly on the product. User should never exceed the vehicle manufacturers maximum tow and weight rating regardless of the capacity of the hitch. FAILURE TO FOLLOW THESE GUIDELINES WILL VOID THE WESTIN WARRANTY AND MAY RESULT IN PERSONAL INJURY AND/OR INJURY TO OTHERS AS WELL AS VEHICLE DAMAGE.

FOR CALIFORNIA RESIDENTS ONLY-PROP 65 WARNING:
Some products may contain chemicals such as DEHP, which can cause cancer, birth defects or other reproductive harm. For more info go to www.p65warnings.ca.gov

Thank you for choosing Westin products for additional installation assistance please call Customer Service 800-793-7846
www.westinautomotive.com

Related Manuals

Leave a Comment