way basics PET-BED-DEL-AG Cat Scratcher Bed Instruction Manual

way basics PET-BED-DEL-AG Cat Scratcher Bed

Parts Included

• 8 Pins
  
• Glue
  
• 1 Bottom zBoard
  
• 1 Scratcher Board
  
• 1 Back zBoard
  
• 1 Front zBoard
  
• 2 Side zBoards
  

WARNING: CHOKING HAZARD Small parts NOT for children under 3 years

ASSEMBLY INSTRUCTIONS

• Assemble your unit on a flat even surface
• Make sure zBoard surfaces are clean and dry
• When moving your Way Basics unit, lift from the bottom
• Use indoors and in dry areas only.
  Do not use in the bathroom

1. Carefully remove the protective layer on Front zBoard, Back zBoard and Bottom zBoard (making sure not to remove the 3M adhesive shown in yellow).
   Tip: Peel protective layer from side
   
2. Apply glue in all holes before inserting alignment pins.
   
3. Apply glue in all holes of Side zBoard. Join the Bottom zBoard to the Side zBoard.
   
4. Apply glue in all holes of Front zBoard and Back zBoard. Align Front and Back zBoard to Side zBoard and join to Bottom zBoard as shown.
   
5. Apply glue in hole of second Side zBoard. Join to assembled unit and press firmly
   
6. Choose between low style or elevated style. Place Scratcher board into unit. Done!
   

CUSTOMER SERVICES

Contact Us www.waybasics.com/contact
Need Help? Call or text 949 229 3304