WAGNER 2439019 Wallpaper Steam Cleaner Instruction Manual
Contents
COMPONENTS
# PART NO. DESCRIPTION
- ——- Water tank
- 2410370 Filler cap
- 2413475 Steam hose
- 2410388 Large steam plate
- 2413191 Small steam plate
SETUP / USAGE
Prior to filling, the water tank must rest on a sturdy, level surface and in an upright position.
- Remove filler cap and fill the water tank with clean water to the MAX level line indicator. Replace the fill cap.
- Thread the hose ends to the threaded outlets of the water tank and the steamplate.
- Plug in the power cord. It will take approximately 12 minutes for the water tank to produce steam. A full container will operate for about 2 hours. To refill, unplug the power cord and let the steamer cool for a minimum of 2 minutes.
- For best results, use a scoring tool or a putty knife and gently score the wallpaper in a crisscross pattern. The perforations will allow the steam to penetrate the wallpaper.
- Once steam is flowing out of the steam plate, hold the steam plate flat against the scored wallpaper for about 10 seconds. Move the steam plate to a new section and remove the steamed section with the scraper blade.
DO NOT OPERATE THE STEAMER ONCE THE WATER TANK IS EMPTY
