DESK-GM48BG Gaming Desk with RGB Lighting
User Guide
Black 48” x 24” Gaming Desk with RGB Lighting
Instruction Manual
Contents
DESK-GM48BG Gaming Desk with RGB Lighting
SKU: DESK-GM48BG
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.
https://vivo-us.com/products/desk-gm48bg
https://vivo-us.com/products/desk-gm48bg
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
[email protected]
www.vivo-us.com
Chat live with an agent!
309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
TOOLS NEEDED
PINCH POINT
DO NOT place hands on or near support bars. Moving parts can crush and cut. Pinch points are created during lifting and lowering the worksurface. Failure to follow these instructions may result in serious personal injury.
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
STEP 1
Place Desktop (A) upside down on a flat surface and place Left Leg (B) and Right Leg (C) over mounting holes in Desktop (A). Secure using M6x16 Screws (S-C) and Allen Wrench (T-A).
STEP 2
Mount Left Crossbar (D) to Left Leg (B) and Right Crossbar (E) to Right Leg (C), and secure the other end to Desktop (A) using M6x16 Screws (S-C) and Allen Wrench (T-A)
STEP 3
Stick Cable Clips (S-D) along the backside of the desk in desired locations. Mount Hook (F) and Cup Holder (G) to predrilled holes on eighth side of Desktop (A) using ST4.2×14 Screws (S-B) and a Philips screwdriver.
STEP 4
Insert Power Cable (I) into Desktop (A).
STEP 5
Mount Cable Cover (H) to Desktop (A) using ST3.5×20 Screws (S-A) and a Philips screwdriver. Connect Power Cable (I) to USB wall charger, or other device.
NOTE: Power Cable (I) can be routed through either slot on Cable Cover (H).
STEP 6
Peel and stick Magnet (S-E) to the back of Remote (J) and secure to desk frame assembly.
If necessary, the foot pads can be adjusted to level the desk assembly.
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
LAST UPDATED: 02/21/2022
REV1.1
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
| 309-278-5303 |
AVG. RESOLUTION TIME (within office hrs.): 5M 4S |
| www.vivo-us.com Chat live with an agent! |
AVG. RESOLUTION TIME (within office hrs.): < 15 M |
| [email protected] |
AVG. RESPONSE TIME (within office hrs.): 1HR 8M – 23% within < 15m – 38% within < 30m – 61% within < 1hr – 83% within < 2hr – 92% within < 3hr |
FOR MORE VIVO PRODUCTS, CHECK OUT OUR
WEBSITE AT: www.vivo-us.com