velleman WSSA122 LED Animated Bell Soldering Kit Instruction Manual

Contents

velleman WSSA122 LED Animated Bell Soldering Kit

Product Information

Product Model: WSAA122-16022021
Power: Maximum 40W

Components:

R1… R4: 0 Ohm (Black) – (zwart) – (noir) – (Schwarz) – (Svart) – (Musta) – (Negro) – (Preto)
R5… R17: 1K (Brown, Black, Red) – (Bruin, Zwart, Rood) – (Brun, Noir, Rouge) – (Braun, Svart, Musta, Negro, Preto)
R18, R19: 3K3 (Yellow, Orange, Orange, Red) – (Geel, Oranje, Oranje, Rood) – (Jaune, Naranjado, Naranjado, Rojo) – (Gelb, Laranja, Laranja, Encarnado)
R20… R28: 1K8 R29, R30: 100K
SW1: Watch the polarity!
T1, T2: BC547
C1, C2: Electrolytic Capacitors

Other Components

6 POWER JACK
START
BATTERY HOLDER
SWITCH
TRANSISTOR
LED

Schematic Diagram: (Diagram not provided in the text)

Important Environmental Information:
This product contains a symbol indicating that it should not be disposed of as unsorted municipal waste. It should be disposed of through a specialized recycling company or returned to the distributor or a local recycling service in accordance with local environmental rules and regulations.

TO ALL RESIDENTS OF THE EUROPEAN UNION
Important environmental information about this product This symbol on this unit or the package, indicates that disposal of this unit after its lifecycle could harm the environment. Do not dispose the unit as unsorted municipal waste; it should be disposed by a specialized company for recycling. This unit should be returned to your distributor or to a local recycling service. Respect the local environmental rules. If any doubt contact your local authorities about waste disposal rules.

Product Usage Instructions

Connect the 6 POWER JACK to a power source with a maximum rating of 40W.
Turn on the SWITCH (SW1).
Follow the schematic diagram to connect the various components (R1… R30, T1, T2, C1, C2) according to their color codes and values.
Ensure that the polarity of the components, especially the Electrolytic Capacitors (C1, C2), is correctly observed.
Insert a 9V BATTERY into the BATTERY HOLDER.
Observe the LED for any indication or response.

Note: For detailed instructions on component connections and circuit configurations, refer to the provided schematic diagram.

Soldering