VEEV Electronic Cigarette
Contents
TURN ON
Press and hold the Button for 3 seconds, then release; Status Lights will turn on slowly. You can use your VEEV ONE™ device.
CHANGE POD
You can change the VEEV ONE™ pod while your VEEV ONE™ device is turned on. When you insert the VEEV ONE™ pod, status lights will turn on slowly. You can use your VEEV ONE™ device.
TURN OFF
You can turn off the device by pressing the Button for 3 seconds.
VEEV ONE™ device
VEEV ONE™ Pod Button (sold separately)
Type-C Charging Cable*
*For optimal charging performance, only use a manufacturer-approved Charging Cable (supplied in the box) and a certified AC Power Adaptor which you should obtain from a reputable source.
BATTERY LEVELS
Short press the Button, Status Lights will turn on to indicate battery level.
When battery is equal or lower than 1%, LED 1 blinks 5 times. Your VEEV ONE™ device can not be used until further charging
LOW LIQUID DETECTION
The upper white light will blink for 5 times. Your VEEV ONE™ device can not be used. Replace the VEEV ONE™ pod.
OVER PUFFING DETECTION
If the device blinks twice it means that you have puffed for longer than 5 seconds.
ERROR NOTIFICATION
The bottom light will blink red for 2 times to indicate error. Try to change the pod. If this happens again, reset your VEEV ONE™ device
RESET
Press the button for more than 10 seconds and release, all lights will blink white twice, confirming that the device has been reset.
CUSTOMER CARE
Customer service
Tel: 800 413 413
DISCOVER THE WORLD OF VEEV ONE™
Visit www.iqos.com or scan the QR code to discover our full range of flowers activate our unique variety of services and programmes.