Portable Large TV Tripod
Instruction Manual
SKU: STAND-TV75T/W
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.
https://vivo-us.com/products/stand-tv75t
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
[email protected] www.vivo-us.com 309-278-5303
Chat live with an agent!
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
- NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR TV STAND.
- USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
PACKAGE CONTENTS
 |
 |
 |
 |
 |
| A (x1) Tripod Base |
B (x1) VESA Plate |
C (x1) Left VESA Bracket |
D (x1) Right VESA Bracket |
E (x1) |
 |
 |
 |
 |
 |
| S-A (x2) M6x50mm Carriage Bolt |
S-B (x6) M6 Lock Nut |
S-C (x4) Plastic Washer |
S-D (x10) Metal Washer |
S-E (x4) |
 |
 |
 |
 |
 |
| M-A (x4) M6x14mm Screw |
M-B (x4) M8x16mm Screw |
M-C (x4) M6x30mm Screw |
M-D (x4) M8x35mm Screw |
M-E (x4) |
 |
 |
 |
||
| M-F (x4) Small Spacer |
M-G (x4) Large Spacer |
T-A (x1) |
||
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
TOOLS NEEDED
Phillips Screwdriver
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
STEP 1
Unfold Tripod Base (A) and tighten the lower knob.
STEP 2
Loosen the upper knob on the pole of Tripod Base (A), adjust the pole to the desired height, insert the retainer pin, then tighten the upper knob.
WARNING: Do not use the bottom hole when installing a TV over 70″ or heavier than 77lbs (35kgs).
STEP 3
Install Mounting Bracket (E) using M6x50mm Carriage Bolts (S-A), Metal Washers (S-D) and M6 Lock Nuts (S-B). The arrow on Mounting Bracket (E) must be pointing up. Tighten with Wrench (T-A).
STEP 4
Assemble VESA Plate (B) to Mounting Bracket (E) using M6x14mm Screws (S-E), Metal Washers (S-D), Plastic Washers (S-C) and M6 Lock Nuts (S-B). Tighten with Wrench (T-A).
STEP 5
Mount VESA Brackets (C, D) to the back of the TV with Screws (M-A through M-D) and M8 Washers (M-E). Spacers (M-F, M-G) may be required. Tighten with a Phillips screwdriver.
STEP 6
Hang the TV with VESA Brackets (C, D) over the VESA Plate (B) and secure with the pre-installed bolts underneath using a Phillips screwdriver.
Adjust as Desired
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
LAST UPDATED: 01/30/2023
REV2
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
309-278-5303 AVG. RESOLUTION TIME (within office hrs): 5M 4S
www.vivo-us.com AVG. RESOLUTION TIME (within office hrs): < 15 M
Chat live with an agent!
[email protected] AVG. RESPONSE TIME (within office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com