ProPEX engineered polymer (EP) water meter fittings
Project information
| Job name: | Location: |
| Engineer: | Date submitted: |
| Contractor: | Contractor: |
| Manufacturer’s representative: | Approved by: |
Technical data
| Material | Engineered Polymer |
| Temp/pressure ratings | 73 °F (23 °C) at 160 psi (11 bar) 180 °F (82 °C) at 100 psi (6.9 bar) 200 °F (93 °C) at 80 psi (5.5 bar) |
| Prop 65 label required? | Yes |
Product information and application use
ProPEX® engineered polymer (EP) water meter service fittings make connections for Uponor crosslinked polyethylene (PEX) tubing for use in hot or cold domestic potable water systems. Inlet PEX end is manufactured with an Uponor ProPEX fitting for connections to Uponor AquaPEX® tubing. The other end is manufactured to meet the NPSM threads of the water meter.
Note: Temperature and pressure ratings stated are hydrostatic ratings. For domestic hot-water (DHW) and DHW recirculation installations, operating conditions should not exceed 140°F (60°C) at 80 psi (5.5 bar) in accordance with ASTM F2023. For additional information regarding applicationspecific temperature and pressure ratings, refer to the Uponor PEX Piping Systems Design and Installation Manual.
| Part name | ProPEX EP Straight Water Meter Fitting, 3/4″ PEX x 1″ NPSM | ProPEX EP Straight Water Meter Fitting, 1″ PEX x 1 1/4″ NPSM | ProPEX EP Elbow Water Meter Fitting, 3/4″ PEX x 1″ NPSM | ProPEX EP Elbow Water Meter Fitting, 1″ PEX x 1 1/4″ NPSM |
| Part no. | WS4360750 | WS4361000 | WS4360751 | WS4361001 |
| A [inch] | 2.989 | 3.606 | 1.575 | 1.941 |
| B [inch] | 1.75 | 2.125 | 1.9 | 2.25 |
| C [inch] | 1.9 | 2.25 | 1.75 | 2.125 |
| D [inch] | 0.82 | 1 | 0.82 | 1 |
| E [inch] | 0.443 | 0.468 | 0.443 | 0.468 |
| F [inch] | 2.169 | 2.606 | 1.925 | 2.275 |
| G [inch] | 0.875 | 1.063 | 0.95 | 1.125 |
| H [inch] | 0.955 | 1.191 | – | – |
| Weight per UOM [lbs/UOM] | 0.22 | 0.3 | 0.24 | 0.34 |
| Part name | Part no. | Codes | Standards | Listings |
| ProPEX engineered polymer (EP) water meter fittings | All | UPC|IBC|IRC|IPC|NPC of Canada|UMC|NSPC|IMC | ASTM E814/ULC S115|ASTM F877|ASTM F1960|CSA B137.5|ULC S102.2|ASTM E119/UL 263|NSF/ANSI/CAN 61|ULC S101|ASTM E84|NSF/ANSI 14 |
IAPMO-ES|HUD MR 1269|ICC-ESPMG|cNSFus-pw|U.P.Code|cQAIus P321 |
| Installation | Related applications |
| ProPEX tool and ProPEX rings (sold separately) are required for connecting the PEX tubing. For more information, refer to the Uponor Piping Pocket Guide. | PEX-a Plumbing Systems |
|
Footnotes |
Contact information | |
| Uponor Inc. 5925 148th Street West Apple Valley, MN 55124 T 800.321.4739 F 952.891.2008 |
Uponor Ltd. |
|
© 2023 Uponor North America. All Rights Reserved www.uponor.com