UMAXX 2AOVUSN6BKUB Set Top Box User Guide

Home » UMAXX » UMAXX 2AOVUSN6BKUB Set Top Box User Guide

2AOVUSN6BKUB Set Top Box

Specifications:

  • Hardware: Amlogic S905Y4-B
  • Chipset: eMMC 8GB
  • RAM: Not specified
  • Flash: Not specified
  • Video Decoding: AV1 [email protected] up to
    4Kx2K@60fps
  • Video File Format Support: *.mkv, *.wmv,
    *.mpg, *.mpeg, *.dat, *.avi, *.mov, *.iso, *.mp4, *.rm, *.jpg,
    *.bmp, *.gif, etc…
  • Video Output: HDMI 2.1, HDCP2.2
  • Aspect Ratio: Auto, Full screen
  • Power:
    • DC Input Range: 12V 1A
    • Power Consumption: 12W

Product Usage Instructions:

  1. Pairing the Remote Control:
  2. Long press the Back and Home button simultaneously until the red
    light flashes quickly. Release the buttons to enter pairing mode.
    Wait for a few seconds without pressing any buttons until a message
    appears on the screen confirming successful pairing.

FAQ:

  • Q: How do I pair the remote control?
  • A: To pair the remote control, long press the
    Back and Home button simultaneously until the red light flashes
    quickly. Release the buttons and wait for a few seconds until a
    message appears on the screen confirming successful pairing.

  • Q: What video file formats are supported?
  • A: The device supports video file formats such
    as *.mkv, *.wmv, *.mpg, *.mpeg, *.dat, *.avi, *.mov, *.iso, *.mp4,
    *.rm, *.jpg, *.bmp, *.gif, etc…

  • Q: What is the power input requirement?
  • A: The device requires a DC input of 12V 1A
    with a power consumption of 12W.

ATSC 3.0 DONGLE (OPTIONAL)
2

USB

STB Power Adapter

Quick Guide Battery

Remote Control HDMI Cable

USB 2.0

Micro SD

Long press the Back and Home button at the same time until the red light flashes quickly, then release. This means the remote control has entered pairing mode. Wait for a few seconds without pressing any buttons until a message pops up on the screen that the remote has paired successfully.

Hardware Chipset RAM Flash Video
Video Decoding

Amlogic S905Y4-B eMMC 8GB AV1 [email protected] up to 4Kx2K@60fps

Video File Format

Support *.mkv, *.wmv, *.mpg, *.mpeg, *.dat, *.avi, *.mov, *.iso, *.mp4, *.rm, *.jpg, *.bmp, *.gif etc…

Video Output

HDMI 2.1 , HDCP2.2

Aspect Ratio Video Resolution

Auto, Full screen

Power

DC Input Range

12V 1A

Power Consumption

12W

device
device device
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

FCC STATEMENT
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Warning Statements: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body.
FCC ID: 2AOVU-SN6BKUB

V1

1. 95 * 95mm 2. 3. 4. 5.80g4C

SY.SMS.A3#.xxxxxx
XXXXXXXXXX

Shenzhen SEI Robotics Co., Ltd.

Leave a Comment