Boat Trailer Instructions
Covers Part #10350
TRA10350 Triple Axle Boat Trailer
Kit contents:
- Hitch Top
- Hitch Bottom
- Support posts, 17mm (8) (assembled to trailer)
- Support posts, 30mm (8)
- Support posts, 37mm (8) (assembled to trailer)
- Support posts, 65mm (4)
- Support posts, 70mm (4)
- Support rails (8) (assembled to trailer)
- Spartan Bow Hook
- M41 Bow Hook
- Double-sided adhesive tape (2)
- 3×0.5mm nylon locknut (1)
- 3x10mm cap screws (CS) (black stainless) (1)
- 3x12mm button-head cap screws (BCS) (black stainless) (2)
- 3x15mm button-head cap screws (BCS) (black stainless) (1)
- 3x18mm button-head cap screws (BCS) (black stainless) (1)
Tools required:
- 2.5mm hex wrench
Pro Tip: Remove the rudder before trailering your boat. This can prevent rudder damage on uneven or rough terrain.
| Outer Support Post Length |
Hole Positions | Inner Support Post Length | Hole Positions | |||||||
| Spartan | 37mm* | A | F | G | L | 17mm* | C | D | I | J |
| M41 | 30mm* | A | F | G | L | 70mm* | B | E | ||
| 65mm* | H | K | ||||||||
*length indicated on support posts
TRAXXAS.com
Traxxas, 6250 Traxxas Way, McKinney, TX 75070, Phone: 972-549-3000, Fax: 972-549-3011, e-mail: [email protected]
HKC23043-R01 240111https://www.traxxas.com/manuals