Towond Outdoor Projector Screen Instruction Manual

Outdoor Projector Screen

Instruction Manual

Contents

(1) Upper crossbar x5
(2) Tripod x2
(3) Ground Nails x6

(4) Storage bag x1
(5) Screen x1
(6) Windproof rope x6

Check to see the attached picture: the 5 crossbars are assembled into a whole, which is used to support the upper part of the screen.
As shown in figure 1 :
Thread the screen onto the crossbar.
(1). As shown in the following figure :
① Loosen the top screw of the triangle bracket as figure1.
② Unfold the triangle bracket as figure2 and figure3.
③ And then tighten the triangle bracket top screw as figure4.
(2) The wrong way to open the triangle bracket as figure 1, figure 2, figure 3.
As shown in figure1:
Loosen the fixing screw of the triangle bracket.
Adjust the height or low degree of the triangle bracket.
As shown in figure 1 and figure 2:
Cross bar connect the top screws of the triangle bracket.
Then secure it with screws.
As shown in figure1:
The magic tape on the left and right sides of the curtain is fixed to the tripod.
As shown in figure 1:
Use a rope to fix it outdoors triangle bracket at the top, and then fasten it to the soil with ground nails.
Scan the QR code below for a video of the curtain installation