INSTALLATION INSTRUCTIONS
Contents
Applicable Installation Environment
Make sure that the wall is in smoothness, and do not stick on any wallpaper.
| Applicable installation environment | Not Applicable installation environment |
 Wood wall / tile wall / metal wall / glass wall / latex paint wall |
 long-term in moist wall / wallpaper / dusty wall |
Installation Steps
- Load-Carrying Check
Check the load-carrying capacity of the wall, and make sure it can bear the weight of the mirror. - Measure off
Mark the distance on the wall at a required height. - Punch Holes
Drill two holes of 0.23-0.31 inches in diameter and 1.98 inches in depth at arranged position.
- Expansion screw
Put the metal screws into the plastic expansion screws - Hang Mirror
Hang the mirror onto the wall then install the mirror holders. - Complete Installation
Make sure the mirror is securely mounted and there are no signs of looseness.