Contents
Dual Monitor HDMI KVM
USER MANUAL
ENJOY THE VIVID WORLD
HDMI • Dual
Features:
- Using only 1 set of keyboard, mouse and 2 monitors to control 2 computers
- Support Unix/Windows/Debian/Ubuntu/Fedora/Mac OS X/Raspbian/Ubuntu for Raspberry Pi and other Linux basic system
- Support resolution up to 3840*2160@60HZ
- Support hot plug, disconnect or connect devices to the KVM at any time without turning off PC
- With EDID emulators in each input port, keep PCs always have correct information, prevent displays setting change while switching input ports
- Support keyboard hotkeys, IR remote control and front panel button to control KVM
- Available to use keyboard and mouse without any delay after switching input sources
- With extra USB 2.0 port, it is possible to connect bar code scanner, USB hard device or other USB device
- Support keyboard and mouse pass through mode to improve KVM compatibility
Packing List
1* 4×2 Dual Monitor HDMI KVM
1* IR remote control
1* DC 12V power adapter
1* User manual
Panel Description:
|
ID |
Name |
Description |
|
1 |
DC 12V | DC 12V power supply |
|
2 |
L/R audio output | Analog audio output, connect to speaker |
|
3 |
HDMI output ports | Connect to HDMI displays |
|
4 |
Keyboard and mouse input | Connect to keyboard and mouse |
|
5 |
Standard USB 2.0 port | Connect to USB 2.0 devices, printers, USB drives |
|
6 |
PC 2 Input | HDMI input A/B: Connect to the two outputs of the same computer
USB: Connect to computer by USB Type A to Type B cable |
|
7 |
PC 1 Input | HDMI input A/B: Connect to the two outputs of the same computer
USB: Connect to computer by USB Type A to Type B cable |
|
8 |
USB connection status | LEDs will be lit if the USB Type B ports connect to computers, and computers are on |
|
9 |
Input selection status | Indicate current active selected input source LED1 on: Both monitors display PC1 LED2 is on: Both monitors display PC2 LED1 & LED2 on: One monitor display one PC |
|
10 |
Input selection button | Switch inputs between 2PCs |
|
11 |
IR receiver | Receive IR remote signal |
|
12 |
Power switch | Turn on or turn off power supply |
Display Mode:
Display mode 1:
LED1 on: Both monitors display PC1
LED2 on: Both monitors display PC2
Display mode 2:
LED1 & LED2 on: One monitor display one PC
Connection Diagram:
Step1: Connect the two outputs of the PC1 to the Input A and Input B of the KVM PC1 inputs.
Connect the USB of the PC to the USB of the KVM PC1 inputs with USB type A to B cable
- HDMI cable
- USB type-A to type-B cable
Note: Both Input A and Input B should be connected to the same computer. If connect only one of them, then the dual monitor function would not work properly.
Step 2: Connect keyboard, mouse or wireless dongle of the keyboard and mouse to the specified ports.
- Keyboard
- Mouse
- Barcode Scanner
- USB drive
- Printer
Step 3: Connect speaker and monitor to the KVM.
- HDMI cable
- Speaker
Step 4: Turn on the power switch to start the Dual Monitor KVM.
How To Use:
- Set up the connection according to the connection diagram.
- After all the PCs are started in step 1, then you can control the Dual Monitor KVM by keyboard hot keys, IR control or the front-panel key ‘SW’, the specific control methods are as follows:
How to use keyboard hot keys:
Press [Right-Alt] key twice to change active selected computer in display mode 2
Select input source 1 in display mode 1
Select input source 2 in display mode 1
Keyboard and mouse focus on the desktop of input source 1 in display mode 2
Keyboard and mouse focus on the desktop of input source 2 in display mode 2
Enable or disable buzzer sound
Turn on or off keyboard and mouse pass through mode
Note: For the best compatibility, it is better to turn on keyboard and mouse pass through mode. In this mode, the keyboard and mouse are dynamically mapped to computer, so you are able to use special keyboard and mouse that with multimedia keys or other customized keys.
How to identify whether the KVM is in keyboard and mouse pass through mode?
Turn on the KVM press [Scroll Lock] + [Scroll Lock] + [F3], if buzzer beeping twice, the KVM is in keyboard and mouse pass through mode. And beeping once means in keyboard and mouse emulation mode.
How To Change The Hot Keys Combination:
There are two kinds of trigger hot keys in this product, the default is [Scroll Lock] key, and the alternative is the [right Ctrl] key. If [Scroll Lock] Key has been used for other functions you can switch the hot key to [Right-Ctrl] by:
Method 1:
→ Press and keep holding the [SW] button on the front panel until you hear the buzzeris beeping, then restart KVM.
Method 2:
→ Press [Scroll Lock] → [Scroll Lock] → [F1], and you will switch the control hot key to [Right-Ctrl].
- Switch to [Right Ctrl]
- Switch to [Scroll Lock]
→ Vice verse, Press [Right-Ctrl] → [Right-Ctrl] → [F1], and you will switch the control hot key to [Scroll Lock].
IR Remote Control:
| Key | Display mode 1 | Display mode 2 |
 |
Cyclically select PC1 and PC2 | Switch to Display mode 1 |
 |
Switch to Display mode 2 | Swap the desktops of two monitors |
 |
Switch to PC 1 | Keyboard and mouse focus on the desktop of PC 1 |
 |
Switch to PC 2 | Keyboard and mouse focus on the desktop of PC2 |
Note:
- For the safety request by some express company, the remote control is not equipped battery by default.
- Unspecified buttons at above are non-functional.
Verified keyboards and mouses:
|
Mouse |
Model | Keyboard | Model |
| Logitech | G500S | Logitech |
G105 |
|
Microsoft Wireless Mouse |
2000 | Microsoft Wireless Mouse | 2000 |
| Hewlett-Packard | M100 | Dareu |
CK535 |
|
Zklli |
ZM500-5 | ME TOO | Z5 |
| FL.SPORTS | G12 | Aigo |
8362 |
|
Aigo |
WQ-641 | AJAZZ | AK35I |
| LDK.al | Colourful X800 | Acer |
KB21-2X |
Note: The above list is part of the verified keyboards and mouses list with special HID protocol.
Warranty Information:
We warrant this product as free of defects in material and workmanship for a period of one (1) year from the date of shipment.
If during the period of warranty this product proves defective under normal use, we will repair or replace this product, provided that this product has not been subjected to mechanical, electrical, or other abuse or modifications. If it fails under conditions other than those covered will be repaired at the current price of parts and labor in effect at the time of repair. Such repairs are warranted for six (6) months from the day of reshipment to the buyer.
Technical Support
Thank you for purchasing the TESmart HDMI KVM Switch.
We are here to help you!
Do you need assistance setting up your product?
Please make sure you:
-Visit https://support.tesmart.com for knowledge base and troubleshooting or scan the QR code directly with apps like Twitter.
-Consult [email protected] for technical support.