1.5hp Inflatable Water Slide Kids Adults
Trouble Shooting Inflatable Air Flow (failure to inflate):
The most common reasons for improper air-flow are listed below. Please rule out Air Leakage from the seams — as this is a correct feature of inflatable operation.
- Are the deflation zippers closed? (some units have 3 or 4 zippers—located at the front, back, side or in the arch)
- Air leaking from sewn seams is normal, during operation!
- Are the flaps closed on the bottom of the slide drains?
- Is the air fill tube twisted restricting air into the unit?
IMPORTANT:
Some units have Water Flaps under the outer wall (shown here). Flaps should be completely closed before inflation—and opened for deflation and drainage!
- Is the air fill tube securely attached to the blower with minimal air leaking out?
- Is the 2nd air fill tube properly tied off with no air leaking?
- Are you using the proper blower (1.0hp vs. 1.5hp vs. 2.0hp)?
- Make sure there is no debris in the blower intake.
