Product Specifications
Bluetooth version: 5.0
Frequency: 2.40 GHZ – 2.48 GHZ
Receiver sensitivity: -92dBm
Working temperature: -10 – 50°C
Working distance: Up to 10-12M
Charging case battery voltage/capacity: 3.7V / 600mAh
Headphones battery capacity: 2 X 3.7V / 55mAh
Headphones charging time: about 1 hour
Playing time: about 5-6 hours x 5 times
Supported protocols: HFP / AIDP / AVRCP
- Earbuds are set to stereo mode before leaving the factory.
- The earbuds will turn off if they are not connected to any
device within 5 minutes. - The iPhone displays the earbuds power in real time.
- When not use, please store the charging case and earbuds in
a dry well ventilated place, and charge it every 3 months. - Waterproof grade is IPX4. Please do not put the earbuds or
charging case into water.
Contents
Accessories
Headphones Usage
In order to get the best audio experience, please wear the left
and right headphones correctly and choose the ear cap that is
most suitable for your ears. When using outdoors, please put
your mobile phone on the same side as your left ear.
Medium-sized ear caps will produce a better bass effect.
Power-on
Method 1
Auto Power On: Earbuds will power on after being
taken out of the charging case.
Voice prompt: “Power On” one earbud breathing
light on while the other off
Power-on
Method 2
Manual Power On: When
the earbuds are switched 
off, short pressing the
multifunctional touch key
for two seconds can start
the earbuds, and the
indicating light will flash
with a “power on” tone.
Press the
multifunction touch
button for 2
seconds
Power-off
Long press the touch key for 
about five seconds, the
indicating light will flash and
the headphones will power
off with a “Power off” tone.
Note: When the two earbuds are paired and working
together, only one of them needs to be powered off;
the other will be powered off automatically.
Binaural Mode
1. Open the Settings on your mobile and turn on Bluetooth
2. Open the charging case, remove the
earbuds, and wear them properly (left in
left ear and right in right ear)
First Connection
3. You will hear “Power on” after wearing earbuds. Left and right earbuds are paired automatically. You will hear “Connected”.
4. Open your mobile phone Bluetooth settings, find
“TWSMJV6” in “OTHER DEVICES” and press to connect.
5. Wait for 1-2 seconds for the Bluetooth to connect, once
connected you will hear the “Connected” indicating tone. Once connected your mobile device will also show that the “TWSMJV6” is connected under Bluetooth settings.
Non-First Connection
3. When correctly wearing 
the earbuds, the left and
right earbuds will pair up
automatically when the user
hears a “Power on” tone.
4. Wait for 1-2 seconds for
the Bluetooth to connect,
once connected you will hear
the “Connected” indicating
tone. Once connected your
mobile device will also show
that the “TWSMJV6” is connected under Bluetooth settings.
Monaural connection of earbud
The below settings apply for for
both the left and right earbuds
- Find “Settings” of
mobile phone
– start the “Bluetooth - Open the charging
case, take out the left or
right earbud, and
correctly wear it on the
corresponding ear. - After wearing the earbud you will hear the “Power
on” prompt. Access your mobile phone Bluetooth
settings, find “TWSMJV6” in other devices and press
to connect. Wait for 1-2 seconds for the Bluetooth to
connect, once connected you will hear the
“Connected” voice prompt. Once connected your
mobile device will also show the “TWSMJV6” as
connected under Bluetooth settings.
Non-First Connection
4. After wearing the earbud you will hear
the “Power on” prompt, and it will be paired
successfully automatically. Hearing the tone
”connected” indicates the connection is
successful.
Voice Assistant
Clicking the multifunctional touch key continuously for
three times can start the Siri voice commands.
Revert to
Binaural mode
If the user wants to start the binaural mode but the earbuds
are still in the single-earbud mode, simply put both earbuds
back into the charging case and take them out again, the
earbuds will go back to binaural function. This can also be
done by manually restoring to default settings.
Restore to default settings
- With a single earbud off, press and hold for
5 seconds until the breathing light flashes quickly. - Tap the earbud 5 times rapidly until no light to reset it to
factory settings. - Put the earbuds into the charging case to enter the
charging mode. Then take out the earbuds and hold
them close together. The 2 earbuds will get paired
automatically. Or press the 2 earbuds at same time for
2 seconds to power on.
NOTE: The above steps need to be done to both
earbuds at the same time. The 2 earbuds are
paired before leaving the factory. The earbuds will
automatically reconnect after being turned on
when they are connected to the same device.
Charging Case Power
The number of flashing
indicator lights indicates the
remaining power level:
4 lights: 75%-100% power 
3 lights: 50-74% power
2 lights: 25-49%
1 light: 1%-24% (the case
will need to be recharged)
Charging the Case
The breathing lights will flash constantly
when charging and automatically turn
off when fully charged.
Use either a type C
cable or wireless
charger to charge – the
indicator light is red
when charging and blue
when fully charged
Charging the Earbuds
The breathing lights will flash constantly
when charging and automatically turn
off when fully charged.
Playing Music
- Click multi-touch key to play/pause
- Press and hold the multi-touch key for 2-3
seconds (L previous song, R next song) - Double tap the multi-touch key to
increase or decrease the volume.
Phone Call
When there is an incoming call, click the
earbud multi-touch key to answer or press
and hold for 2-3 seconds to reject. 2.During a
call, clicking the earbud multi-touch key will
end the call and return to the previous state
In stereo mode, L to decrease volume and R
to increase volume. When volume reaches its
minimum or maximum a beep will sound. In
mono mode, you will hear a beep when
volume reaches maximum and then volume
will decrease.
Troubleshooting
TERMS AND CONDITIONS
Our goods come with guarantees that cannot be
excluded under the Australian Consumer Law. You
are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail
to be of acceptable quality and the failure does not
amount to a major failure.
- TEAC warrants that this product is free from
defects in material and workmanship under normal
domestic use with reasonable care and skill.
Maintenance and cleaning (i.e. laser head) is not
covered by this warranty. The TEAC warranty only
applies to TEAC products purchased NEW from a TEAC Authorised Retailer in Australia. This warranty only
applies to the original purchaser and cannot be
transferred. - The benefits to the consumer given by this Warranty are
in addition to other rights and remedies
of the consumer under a law in relation to goods or
services to which the warranty relates, being
the Australian Consumer Law. - Refund or replacement via your TEAC Authorised
Retailer is available for a period of 14 days after purchase
for goods that have been inspected and determined to
have a major failure.
Refund and exchange is not applicable for change of
mind. - Subject to the terms herein, this warranty effectively
covers TEAC products under the 12 Month Replacement
Warranty Scheme, 12 months from the date of original
purchase. - 5. The warranty is void and warranty claims may be
refused, subject to the Australian Consumer Law, if:
a) The product was not transported, installed, operated or
maintained according to manufacturer
instruction, or
b) The product was abused, damaged, tampered, altered
or repaired by any unauthorised persons,
or
c) Product failure is due to accidents during use,
installation or transit, power surges, use of defective or
incompatible external devices, exposure to abnormal
conditions such as excessive
temperatures or humidity, or entry of liquids, objects or
creatures into the product, cockroach infestations, or
d) The customer is unable to provide proof of purchase of
the product for verification, or
e) The serial number of the product is missing or has been
tampered with. - No one is authorised to assume any liability on behalf
of TEAC or impose any obligation on it, in connection with
the sale of any equipment other than as stated in this
warranty and outlined
above. - TEAC and/or its Authorised Service Centres reserve
the right to inspect and verify whether the
product is exhibiting a major failure as claimed by
customers/retailers.
TEAC Warranty Service Hotline
1300 553 315
Call us between Monday to Friday – 8.30AM to 5PM
AEST
*Please have your purchase receipt and the product’s
serial number ready
For other enquiries and support please visit
www.teac.com.au
Read More About This Manual & Download PDF:
TEAC True Wireless Earbuds with Wireless Charging TWSMJV6 User Manual –
TEAC True Wireless Earbuds with Wireless Charging TWSMJV6 User Manual –