SUSSEX DWTA Duet Wall The Duet Wall Top Assembly is a tapware product from Sussex Taps. It is designed for installation into a wall breech and comes with two rough-in options. The assembly includes a handle assembly (consisting of A1 – Handle, A2 – Spindle … Read more
SUSSEX RBM Basin Mixer Installation Guide DIMENSION The Mixer is supplied assembled, only the Fixing nut and the clamp need to be removed. After removing the mentioned parts, lower the Mixer on to the mounting surface and fit the Flexible Hoses. In some cases the … Read more
SUSSEX RWM Circa Wall Mixer Dimension Combined wall thickness not to exceed 30mm. Wall thickness greater than 30mm, contact manufacturer prior to completing rough-in. Plumber note On-site testing using higher water pressures must be conducted with the Mixer in the closed position. (STATIC TEST) Under … Read more
SUSSEX DWBS165 Wall Basin Set Installation Guide Introduction Product code DWBS165 DWBS200 DBS165 DBS200 Rough-in: The In-wall (Master fit) is supplied and is to be used in conjunction with this Tapware. Secure a noggin 45mm (i) back from the front of the stud. Attach the … Read more
SUSSEX DWBS200 Wall Basin Set Installation Duet Wall basin/bath set Product code DWBS165 DWBS200 DBS165 DBS200 Rough-in: The In-wall (Masterfit) is supplied and is to be used in conjunction with this Tapware. Secure a nogging 45mm (i) back from the front of the stud. … Read more
SUSSEX DPTMHM Duet Top Mount Hob Mixer Product Code DPTMHM Install Preparation Maximum Mounting Surface thickness is 45mm. (i) Hob Mixer: 49mm – 51mm Clearance Hole. (ii) Mounting Surface must be flat and level. Prior to installing remove: (B) Clamping Ring (C) Clamping Plate Product … Read more
SUSSEX Duet Progressive Wall Mixer Installation Guide Rough-in The In-wall (Body Mixer) is supplied and is to be used in conjunction with this Tapware. Secure a nogging 32mm (i) back from the front of the stud. Attach the Wall Body Mixer to the nogging. Ensure … Read more
Circa Wall top assembly Rough in plumbing Upon receiving, carefully unpack the Tapware; note some parts have been combined for packaging purposes. Separate parts as shown in diagram. The Spindles are supplied with Hot and Cold indication. Install the Spindles hand-tight until the seal of … Read more
Basin set Product code RBS Basin set RBSHS Basin sink set high RBS-V Basin set – Vertex RBSHS-V Basin sink set high – Vertex Installation guidelines The Spindles will be supplied fitted into the Basin Bodies when supplied. Determine the distance of the Basin/Hob holes … Read more
SUSSEX RBS150 Wall Bath Set Product Information Product Name: Circa Wall Bath Set Components: Set Screw Handle Body Locking Sleeve Fibre Washer Ceramic Spindle Cartridge O Ring Outlet Flange Basin Body Locknut Locking Screw Plastic Washer Outlet Locknut Breech Product Codes: RBS150 – Wall bath … Read more
