User Manual PAC Audio Factory ANC Module Bypass Harness ANC-CH01 Introduction and Features The ANC-CH01 harness bypasses the Active Noise Cancellation (ANC) module in select Chrysler, Dodge, Jeep and RAM non-amplified audio systems while maintaining communication between the vehicle’s CAN bus network and the … Read more
PAC SRRUN10H Toyota 4Runner Radio Replacement Kit Introduction and Features The SR-RUN10H is a complete radio replacement kit for the installation of the Stinger HEIGH10® modular radio in Toyota 4RUNNER. All modules, cables and adapters are included to retain important features of the factory system, … Read more
PAC RP4.2-TY13 Wiring Interface Owner’s Product Information Specifications: Product Name: RP4.2-TY13 Compatibility: Select Toyota vehicles Features: Allows replacement of factory radio Retains factory features such as steering wheel controls, rear camera, and factory audio amplifier Programmable dual command functionality for SWC buttons Outputs: VSS, illumination, … Read more
PAC LPHGM71 LPH Harness Installation Guide Wiring Connection Chart (All Models) MODELS LPA-E4 LPA2.4 / LPA2.2 LPA1.4 / LPA1.2 Important Note: This harness is provided with a inline fuse installed. Please remove prior to install and reinsert once finished. If your vehicle does not provide … Read more
PAC OEM-1 Wiring Interface Product Information Specifications OEM-1 REV.10-23-02 Compatible with aftermarket head units Available cables: A, B, C Product Usage Instructions Installation instructions for cables on List A List A cables are used for replacing the factory head unit. Follow the steps below: Consult … Read more
Pacific Accessory Corporation OEM INTEGRATION PRODUCTSP-PACK2C OEM-1 REV.10-23-02 Cables for replacing Factory head unit. Installation instructions for cables on list 11 “A” The “A” cable, is used when replacing a factory radio. (the appropriate cable from list “B” is also required). One end of cable … Read more
PAC LPHCH41 LPH Audio Integration Harness Important Notes: All LPH harnesses are designed to work on OEM Non-Amplified systems. All LPH harnesses are designed to be modular and used in various applications: Adding Multi-Channel Amplifiers Front – LPH-SPK(A) / (C) Adding Multi-Channel Amplifiers Rear – … Read more
OEM-1 REV.1CJ.-23-02 Cables for replacing Factory head unit. ROEM-NIS1 Wiring Interface Installation instructions for cables on list “A” The “A” cable, is used when replacing a factory radio. (the appropriate cable from list “B” is also required). One end of cable plugs into or connects … Read more
