nVent RAYCHEM E-100-L-E End Seal with Indicator Light Product Information The E-100-L-E is an end seal kit designed for use with all nVent RAYCHEM BTV, QTVR, XTV(R), KTV, HTV, and VPL heating cables. It has a rating of II 2 G Ex eb mb IIC … Read more
nVent RAYCHEM Elexant 5010i, 5010i-LIM Field Controller Product Information Elexant 5010i & Elexant 5010i-LIM The Elexant 5010i & Elexant 5010i-LIM are functional safety-approved products from nVent. The Elexant 5010i has a SIL 2 (1oo1) certification, while Elexant 5010i-LIM has a UL 22 ATEX 2446X and … Read more
nVent RAYCHEM 107442000 FrostGuard Self-Regulating Cable Kit Product Information The nVent RAYCHEM FrostGuard Self-Regulating Cable Kit is a kit format designed for pipe freeze protection. The kit contains self-regulating trace heating cables, pre-installed with electrical cable and plug to provide an energy-efficient and easy-to-use solution. … Read more
RAYCHEM AT-TS-13 / AT-TS-14 Installation instructions https://www.youtube.com/watch?v=6m67lAv3hrg Unit layout A Green LED Heating cable on B Red LED Sensor break C Red LED Sensor short-circuit The thermostat should be installed and adjusted by qualified personnel only. The relevant safety regulations must be observed. Check the … Read more
Elexant 450c Control Unit Product Information Product Name: Elexant 450c Firmware Version: E2.2.0 or higher (for Elexant 450c)| Firmware Version: E2.2.1M or higher (for Elexant 450c-Modbus) Dimensions: 82 mm x 110 mm x 158 mm Supported Languages: English (EN), German (DE), French (FR), Dutch (NL), … Read more
RATCHEM HTV CONNECT AND PROTECT Self-regulating heating cable HEATING CABLE CONSTRUCTION The nVent RAYCHEM HTV self-regulating heating cable is designed for freeze protection or process temperature maintenance of pipes and vessels with very high continuous operating temperatures (205°C). Maximum exposure temperature is 260°C. The HTV … Read more
nVent RAYCHEM E-100-E High-Profile End Seal Kit Product Information Product Name: E-100-E – Compatible Models: XTV(R), KTV, BTV, QTVR, VPL, HTV – Certifications: PTB 09 ATEX 1060 U BAS 21 UKEX 0651 U, II 2 G Ex eb IIC Gb II 2 D Ex tb … Read more
nvent RAYCHEM T2Red and Reflecta Self-Regulating Floor Heating System Installation Guide General instructions nVent offers a 12 year Total Care Warranty for this product. Please check the Total Care Warranty Certificate and Registration Form (included in the Commissioning form or downloadable from nVent.com) for more … Read more
nVent RAYCHEM HVS-1523S Heat Shrink Inline Cable Splice Kit Suggested Installation Equipment (not supplied with kit) Cable preparation tools Tyco Electronics P63 cable preparation kit or cable manufacturer approved solvent Clean, lint-free cloths Non-conducting abrasive cloth, 120 grit or finer Electrician’s tape Connector(s) and installation … Read more
nvent RAYCHEM NGC-30-CR RMM3 Remote Temperature Module Modules for use with the nVent RAYCHEM NGC-30 WARNING: This component is an electrical device that must be installed correctly to ensure proper operation and to prevent shock or fire. Read these important warnings and carefully follow all … Read more
