Installation Manual Toshiba Magmeter (for remote installation and configuration)(LF622; LF232 converters: LF654, GF632 and LF664 detectors) NOTE: CHECK THE OPERATION MANUAL FOR SAFETY AND STORAGE PRECAUTIONS BEFORE INSTALLATION!! 1.Installation and wiring. Install meter in accordance to the installation instructions and wire unit according to the … Read more
24046435 Keypad Entry with Built-in Alarm Installation Instructions Model FE576 Tools Needed Phillips screwdriver Optional Tools Tape Measure Pencil Flathead Screwdriver Wood Block Hamme Exterior Keypad, Alarm Interior Optional Latch Faceplate Batteries Pin Wrench Important Notes DO NOT use a power drill for installation! Use … Read more
Schlage Control™ Smart Deadbolt with Engage Technology Model FE410F Door Preparation Instructions for Door with No Holes Tools Needed Pencil Pencil Drill Bits Needed Drill and Drill Bits Bit Sizes: ¹⁄₈”, 1” Hole Saw Hole Saws 1″ 2¹⁄₈” Chisel Chisel Hammer Hammer 1 Measure … Read more
P518-149 Installation Instructions Model FC21, Combined interior This lock can be installed as passage (hall/closet) or privacy (bed/bath). See the included Privacy function kit. a. Knob/Lever b. Trim c. Exterior chassis d. Latch e. Interior chassis f. Chassis screws g. Backplate … Read more
JD60/JD62Installation Instructions A. Mounting Screws (2)B. Inside CylinderC. ThumbturnD. DeadboltE. Outside CylinderF. KeyG. Faceplate (choice of 3)H. Latch/Strike Screws (4)J. Strike 1 Choose Faceplate to Match Door 2 Choose Deadbolt Backset 3 Install Deadbolt 4 Install Outside Cylinder Align holes with notches before installing … Read more
INSTALLATION INSTRUCTIONS FOR 1. Safety Information Read the precautions and instructions in this manual before installing and using this lock. Save this manual for future reference. A. Do not attempt to disassemble any internal components of the lockset. Doing so will void the limited warranty. … Read more
F60, F60F, F62, F93 Installation Instructions Before Installing the Lock, Check Door Jamb and Door Preparation (See Page 5) 1. Choose Faceplate 2. If Necessary, Adjust Deadbolt 3. Install Latch and Deadbolt If door has ⁷⁄₈” (22 mm) hole, remove latch sleeve 4. Install Handleset … Read more
Schlage Control Smart Deadbolt Installation Manual OVERVIEW OF THE LOCKSET (1) ENTER / LOCK BUTTON Red light: Represents an incorrect entry or the unit is programming mode. Yellow light: Flashes when the batteries are low in power. Green light: Represents a correct entry. Press to … Read more
Installation Manual Home Keypad Lock BE369 1.Important Information Lock comes preset with a default Programming Code. Lock comes preset with two default User Codes Need Help? 888-805-9837 (U.S.A./Canada) Tools Needed Phillips screwdriver Tape Measure Pencil Optional Flathead Screwdriver Wood Block Hammer … Read more
Installation Instructions FA360/FA362/FA393 Tools for Door Prep 2¹⁄₈” or 1¹⁄₂” hole saw Drill bits: 1″, ⁷⁄₈”, ³⁄₈” ¹⁄₈” Pencil and Chisel Tools for Install Phillips Screwdriver Flat Head Screwdriver * For FA360 and FA362 ONLY A. Deadbolt Assembly B. Deadbolt C. Thumbturn Housing D. Housing … Read more
