IO HVAC Controls RD-XX Series Retro Damper RD-XX SERIES RETRO DAMPERTM The RD-XX Series Retro Dampers are devices that can be used with most zone control panels that have the ability to directly power a 3-wire actuator. Each Retro Damper is rated at 24Vac, 2VA. … Read more
iO HVAC Controls RBD-XX Register Boot Damper RBD-XX REGISTER BOOT DAMPER Product Information The RBD Register Boot Damper is a retrofit zone damper designed for installation in a register boot without having to take the duct work apart. It is available for register boots with … Read more
RUSKIN BTD830 Bubble Tight Isolation Damper Specifications Product Name: BTD830 Bubble Tight Isolation Damper Operational Ratings: Leakage Rating: Bubble Tight per AMCA 500-D Maximum Velocity: 4000 FPM (20.3 m/s) Maximum Pressure: 10 in.wg. (2.5 kPa) Design Features: Description: Single-bladed damper for extremely low leakage Frame: … Read more
Dobinsons SS29A844 Adjustable Monotube Steering Damper This Steering Damper will take approximately 1 hour to install Dobinsons products should be installed by a qualified installer, and it is the installers responsibility to ensure correct fitment. Dobinsons is not responsible for any damage incurred to the … Read more
Industrial Ventilator Damper Refer to product table below for applicable product codes covered by this document Product Type & Application Bradford Ventilation Industrial Ventilator Dampers are designed to be used with the Hurricane ® and EcoPower® ventilators. Industrial Ventilation Dampers are suitable for applications where … Read more
RBD-XXRegister and boot not included. Just slide damper in and screw down the mounting bracket. REGISTER BOOT DAMPER The RBD Register Boot Damper is a retrofit zone damper designed to be installed in a register boot without having to take the duct work apart. RBD … Read more
BROAN FRESH INTM FIN-6MD Motorized Supply Damper Product Information The product is called FRESH INTM FIN-6MD. It is designed for residential use only. The installation instructions provide important information and warnings to ensure safe and proper usage of the product. The manual uses specific symbols … Read more
GREENHECK SMD-401M Smoke Damper Product Information Product Name: SMD-401M Smoke Damper Application: The SMD-401M is a class I leakage-rated modulating smoke damper with extruded airfoil blades. It can be installed vertically (with blades running horizontally) or horizontally and is rated for airflow and leakage in … Read more
Odour-tight back-draft damper for square ducting INSTALLATION Insert the damper between ducting. Ensure the airflow direction is correct. CAUTION: Do not use any sharp tools. They could damage the membrane. The damper is not designed for use in aggressive environments. MAINTENANCE GBV back-draft damper components … Read more
FIREPLACE PRODUCTS 1205 Seal Tight Damper Instructions 1205 Seal Tight Damper SEAL TIGHT DAMPER SIZE A FITS INSIDE FLUE WIDTHS (INCHES) A FITS INSIDE FLUE WIDTHS (INCHES) INSIDE DAMPER DIMENSION (W X L) INCHES OUTSIDE DAMPER DIMENSION (W X L) INCHES 8 x 8 7″ … Read more
