AKO 5753H072 Gas Transmitter with NBIoT Communication Specifications Gas transmitter with NBIoT communication Model: AKO-575400N / NE, AKO-575744N Operating Voltage: 12 – 30 Vdc Communication: RS485 Gas sensor for detecting gas concentration in ppm Warning Transmitters/detectors should be installed in a place protected from vibrations, … Read more
AKO-59720 Temperature Monitor Instruction Manual Description Temperature monitor with built-in NB-IoT communication. It records the temperature data from the various inputs and the status of the digital input and transmits it to the cloud (akonet.cloud). Both the configuration and monitoring of the data are carried … Read more
AKO-D14730 Universal Controller Warnings If the device is used without following the manufacturer’s instructions, it may fail to meet its safety requirements. Only sensors supplied by AKO should be used for the device to operate correctly. The equipment should be installed in a place that … Read more
AKO-575022 V3 Gas Transmitter Product Information The V3 Gas Transmitter is a device designed for detecting and supervising gas concentration levels in industrial refrigeration systems. The transmitter is equipped with a gas sensor that detects gas concentration levels and displays the type of gas detected … Read more
D16323 Large Screen Temperature Controller Installation Guide Warnings Using the equipment without following the manufacturer’s instructions may affect the device’s safety requirements. To ensure that the device operates correctly, only probes supplied by AKO should be used. The unit must be installed in a location … Read more
16526, AKO-16526A V2 Controller Instruction Manual AKO-16526, AKO-16526A V2 Controller Controlling an electronic expansion valve (Stepper-type) using the AKO-16526 / AKO-16526A V2 controller The AKO-16526 / AKO-16526A controller can be used to control a PWM-type electronic expansion valve directly; an external driver must be used … Read more
AKO 5762H512 Gas Detector Warnings Detectors should be installed in a place protected from vibrations, water and corrosive gases, where the ambient temperature does not exceed the value indicated in the technical data. Detectors are not suitable for areas classified as potentially explosive. Detectors supervise … Read more
5762H402 Ed.04 InstructionsAKO-57624 General warnings Using the unit without observing the manufacturer’s instructions may alter the appliance’s safety requirements. Detectors should be installed in a place protected from vibrations, water and corrosive gases, where the ambient temperature does not exceed the value indicated in the … Read more
5760H002 Ed.02 55624 1 Channel Gas Detection Alarm Station Installation Guide AKO-55624 1 Channel Gas Detection Alarm Station Use of the AKOGas alarm in refrigerated installations AKO-55624 / 55724 series gas alarms have been designed to detect refrigerator gas in refrigerated facilities. There are two … Read more
Calibration kit AKO-58110 5812H002 Ed.03 Installation Guide Installation The AKO-58110 calibration kit enables the testing, verification of accuracy, reset to zero and calibration of the transmitter. Install the kit, attaching it to the transmitter window as shown in the image. Press hard until it fits … Read more
