SWISS MILITARY HANOWA SMWGH2200105 Roadrunner Watch Instructions

Instruction manual

RONDA 505.24H
RONDA 515.24H

WATCH INDICATIONS

SETTING THE TIME

If your watch is fitted with a screw-down crown, use your thumb and forefinger to unscrew it. For a normal crown, go directly to step 1.

1. Pull the crown out to position III.
2. Turn the crown to the desired time. Remember, the date advances at 12:00 midnight, not 12:00 noon.
3. Push the crown back into position I.
4. If you have a screw-down crown, make sure you screw the crown down correctly by exerting slight pressure on it as you turn.

SETTING THE DATE

Quick-change correction for date

The date can be corrected during the day-changing phase between 10 pm and midnight. The date of the following day must therefore be set, because no automatic date change will occur at midnight.

1. Pull the crown out to position II (watch still running).
2. Turn the crown until the required date appears (D).
3. Push the crown back into position I.
4. If you have a screw-down crown, make sure you screw the crown down correctly by exerting slight pressure on it as you turn.

QUICK-CHANGE CORRECTION FOR 24-HOUR DISPLAY

1. Pull the crown out to position II (watch still running).
2. Turn the crown anticlockwise until the desired time appears (E).
3. Push the crown back into position I.
4. If you have a screw-down crown, make sure you screw the crown down correctly by exerting slight pressure on it as you turn.