SLV 1006541 48V Track Surface Instruction Manual

SLV 1006541 48V Track Surface

Package Content

The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations!

Installations

Dimension

Safety advices for installation and operation.
Disregard may lead to danger of life, burning or fire!
The components and luminaires of this system may not be combined with track systems of safety class I or II or with any other track system.
The track ends must be covered with end caps suitable for the system.
Do not fasten anything on the product.
Do not cover the product.
Take out of service when suspecting a defect or malfunction and contact your dealer or a qualified electrician.
Take measures that children get not harmed by the product.

Additional safety advices =

Use as directed

Electrical Track System for lighting
Safety class III (3) – Operated with safety extra-low voltage.
Operate only in dry indoor area.
Do not strain mechanically or expose to strong dirt contamination.

Operation

It is the responsibility of the user to ensure the electrical and thermal compatibility between the rail system and the luminaires connected to it.
Caution: To avoid the danger of overheating and fire the conductors may not be bridged.
The electrical screw connections have to be checked regularly on the voltage-free track and if necessary be tightened hand-screwed.
Do not direct luminaires on the track, other luminaires or the transformer.

Care / Storage

Disconnect product from mains and let it cool down.
Clean external surfaces regularly with a slightly moistened (water) cloth. Store dry and clean.

Check secure fixation and proper function!