RYOBI RLL10RD Red Cross Line Laser Instruction Manual

IMPORTANT!
It is essential that you read the instructions in this manual before assembling, operating, and maintaining the product.
Subject to technical modifications.
It is essential that you read the instructions in this manual before assembling, operating, and maintaining the product.
Subject to technical modifications.
Contents
INTENDED USE
The cross line laser is intended to be used only by adults who have read and understood the instructions and warnings in this manual, and can be considered responsible for their actions.
The product is intended for determining and verifying horizontal and vertical lines.
Do not use the product for any other purpose. Use of the product for operations different from intended could result in a hazardous situation.
CROSS LINE LASER SAFETY WARNINGS
- Laser radiation. Do not stare into beam. Class 2 laser product.
- Risk of severe eye injury if the laser beam is directed at persons or animals. Avoid direct eye exposure.
- Do not direct the laser beam towards other people.
- Do not operate the product around children or allow children to operate the laser.
- Avoid using the product on reflective surfaces. The laser beam may be reflected at the operator or other persons.
- Store the product indoors and avoid substantial knocks, continuous vibration or extreme temperatures.
- Always keep the product away from dust, liquids and high humidity. They may damage internal components or affect accuracy.
- If laser beam hits your eye, you must close your eyes and immediately turn your head away from the beam.
- Do not position the laser beam so that it unintentionally blinds you or others.
- Do not look into a laser beam using magnifying optical devices such as binoculars or a telescope. This will increase the level of eye injury.
- If you use laser goggles to enhance the visibility of the laser beam, note that they will not protect your eyes against laser radiation.
- Do not remove or deface warning labels on the product.
- Do not disassemble the product.
- Avoid heavy impact to or dropping of the laser. The accuracy of the laser should be checked before use if it has been dropped or subjected to other mechanical stresses.
- Do not operate the product in explosive areas or in extreme environments.
SELF-LEVELLING LED INDICATOR

MAINTENANCE
- Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, carbon dust, etc.
- For greater safety and reliability, all repairs should be performed by an authorised service centre.
SYMBOLS ON THE PRODUCT


SYMBOLS IN THIS MANUAL




PRODUCT SPECIFICATIONS

Imported by:
Techtronic Industries Australia Pty Ltd
31 Gilby Road, Mount Waverley, VIC 3149
Melbourne, Australia
Techtronic Industries Australia Pty Ltd
31 Gilby Road, Mount Waverley, VIC 3149
Melbourne, Australia
Techtronic Industries N.Z. Limited
Unit C, 70 Business Parade South,
Highbrook, Auckland 2013, New Zealand
RYOBI is a trade mark of Ryobi Limited, and is used under license.
Unit C, 70 Business Parade South,
Highbrook, Auckland 2013, New Zealand
RYOBI is a trade mark of Ryobi Limited, and is used under license.
20230303v1