QMPARTS A2701-03901 Upgraded Mirrors Doors Off Compatible
Contents
IMPORTANT
- Please read the installation instructions carefully before you start.
- For your safety and to ensure a satisfactory installation, please complete all the installation steps in the order shown below.
PRODUCT INFORMATION
INSTALLATION STEPS
Assemble the right mirror arm ③, billet bushing ⑨ and mounting bracket ⑤.
Install the bolt ⑥ and flat washer ⑧, tighten the bolt, don’t over tighten them, you can adjust them as needed.
Wrangler JK JKU
Remove two original flush mount torx head bolts and washers just in front of door hinge.
Use the two original bolts and washers just removed to fix the bracket on the flat side.
Wrangler TJ
Remove two original flush mount torx head bolts and washers just in front of door hinge.
Use the two original bolts and washers just removed to fix the bracket on the flat side.
Remove two original flush mount torx head bolts and washers just in front of door hinge.
Use the two original bolts and washers just removed to fix the bracket on the flat side.
Attach mirror ① to flat side of arm ③ using the bolt ⑩, flat washer ⑧ and lock washer.
Adjust the mirror ① head into desired position, tighten three screws [A], DO NOT over tighten.The mirror ① should be tight but able to be adjusted if needed.
STEP 7: Repeat steps 1-6 to install the other side.
Customer Support
If you have any questions, please feel free to contact us.
Email: [email protected]