Prana Air Ambient Air Monitor Owner’s Manual

Prana Air Ambient Air Monitor

KNOW YOUR MONITOR

For your reference

1. Fan
2. Micro SD Card Slot
3. USB Power Supply
4. RS-485 Slot

   

HOW TO CONNECT

1. Pull out the green plug from the bottom.
2. Insert positive and negative part as mentioned on the plug.

   

3. Insert the plug back into the device.
4. Insert the USB and power on the device.
   
5. Set the perimeters as follow:
   • Baud Rate : 9600
   • Data Bit : 8 Bit
   • Parity: None
   • Stop Bit : 1
6. You can check the data in the following Address on your device.
   Address (Holding Register)