Contents
Polybird P52 Oval End Table
Specifications
| Model Number | P52 |
|---|---|
| Required Tools | Screwdriver (not provided) |
| Included Hardware | #8 x 2 1/2″ screws (Quantity: 8) |
Parts Overview
- A – Table Top
- B – Legs (2 pieces)
- C – Legs (2 pieces)
- D – Brace
- E – Brace
Assembly Instructions
- Attaching Legs to Table Top: Slide legs of part B against the short ends of braces on the bottom of table top A using one #8 x 2 1/2″ screw per leg. Rotate the assembly and repeat for leg C.
- Attaching Braces to Legs: Attach brace D to legs C & B using one #8 x 2 1/2″ screw per corner, as shown. Repeat for brace E.
FAQ
- What if I don’t have a screwdriver?
- You will need to obtain a screwdriver to assemble the table, as it is not included with the hardware.
- How many screws are needed for assembly?
- You will need a total of 8 screws, which are included with the table parts.
- Can I use a power tool instead of a screwdriver?
- Yes, you can use a power tool, but be cautious not to over-tighten and strip the screws.