Repeater™ Roger
Contents
Components
Device description
- Indicator light
- Connect
- On/Off
- Micro-USB
- Feet
Charging
Switching On/Off
Connect a Roger Repeater
Only one Roger Repeater can be connected at a time. Repeat the process to connect another. Keep any other Roger unit out of range during this process.
Indicator light
 |
On/Off Charging Fully charged Switched on Recharge device |
On/Off
Connecting
Repeater or receiver connected
No device to connect in range
Not a compatible device
Audio broadcast range
 |
too close ok too far put of range |
Mounting bracket
= The bracket can be fixed to the wall or used with a support using a 3/8” – 16
thread (like microphone stands).
3/8°-16 Mic stands
Retention clip
USB cable retention
Repeater transmission pattern
- Please be aware of the transmission pattern of the repeater and adapt its position to your room and the area to cover
Repeater placement
Connect a Roger receiver
- Only one Roger receiver can be connected at a time. Keep any other Roger unit out of range during this process.
Operating range
Reset
- Detailed usage information is available online