Contents
Parker Laboratories Inc TLL155751-DE Signagel Electrode Gel
Product Information
The Signagel Electrode Gel is a non-sterile, multipurpose, electrically conductive, water-soluble, non-staining, non-gritty electrode gel. It is bacteriostatic and recommended for all electromedical procedures including ECG, defibrillation, biofeedback, and EMG. The gel is non-flammable and non-corrosive. It does not contain parabens.
Manufacturer: Parker Laboratories, Inc.
Address: 286 Eldridge Road Fairfield, NJ 07004 USA
Contact: 973-276-9500
Website: parkerlabs.com
EC Representative: Parker Laboratories BV
Address: Bedrijvenpark Twente 305, 7602 KL Almelo, The Netherlands
CH Representative: MDSS CH GmbH
Address: Laurenzenvorstadt 61, 5000 Aarau, Switzerland Product Code: PM-015-0001D
Product Usage Instructions
- Refer to the Instructions For Use provided by the manufacturer of the electromedical device being used for information on how Signagel should be used with their product.
- Signagel is water soluble and can be removed using a moistened soft cloth.
Instructions for Use
Description
Signagel Electrode Gel is a non-sterile, multipurpose, electrically conductive, water-soluble, non-staining, non-gritty electrode gel. It is bacteriostatic.
Indications for Use
Signagel is recommended for all electromedical procedures including ECG, defibrillation, biofeedback and EMG.
Warnings
- Do not use on patients with a known history of skin allergies to parabens.
Any serious incident that has occurred in relation to the device should be reported to the manufacturer and the competent authority of the EU Member State in which the user and/or patient is established.
Precautions
- For external use only on intact, unbroken skin.
- Discard product if package is damaged or evidence of contamination is present.
- To avoid contamination of product, the tube container tips should not come into contact with patient, staff or instruments.
Directions for Use
Refer to the Instructions For Use provided by the manufacturer of the electromedical device being used for information on how Signagel should be used with their product. Signagel is water soluble, and can be removed using a moistened soft cloth.
Handling
No special handling required. Signagel is non-flammable and non-corrosive.
Storage
Protect product from direct sunlight.
Disposal
Follow all federal, state, and local regulations for non-hazardous waste disposal.