Contents
PANDUIT S2-38R-T Metallic Copper Base Non-Insulated Tubular Ring Terminal
Specifications
- Manufacturer: Panduit Corp.
- Model: T-PMPI-304-PC
- Connector Type: Compression Connector
- Compatibility: Copper Cable
Product Usage Instructions
- Step 1: Prepare the Tools
Ensure you have the appropriate crimping tool as indicated in the tool chart. - Step 2: Insert Connector
Using the installation tooling, insert the connector in the die, and align it between the color bands or knurl markings. - Step 3: Crimping
Follow the markings on the connector to evenly space crimps on the barrel. Start crimping near the lug’s tongue end and continue towards the wire end. - Step 4: Number of Crimps
Refer to the tool chart for the required number of compressions for your specific wire size. - Step 5: Inspection
After crimping, inspect for any sharp edges, flash, or burrs. Remove them if present to ensure a secure connection.
FAQ
- Q: How do I choose the correct crimping tool?
A: Refer to the Tool Chart for Compression Connectors Type S-R with Copper Cable to match the appropriate tool with your wire size. - Q: What should I do if I encounter sharp edges after crimping?
A: If you find sharp edges, flash, or burrs after crimping, carefully remove them to prevent any damage or safety hazards. - Q: Can I use dieless tools with this connector?
A: Uni-DieTM Dieless Tools are available for specific models. Refer to the list provided in the manual for compatible tools.
COPPER COMPRESSION CONNECTOR INSTALLATION
INSTALLATION INSTRUCTIONS
C Panduit Corp. 2024
- Using installation tooling shown on other side, insert connector in die and crimp between color bands or knurl markings, use these markings as a guide to evenly space crimps on barrel of connector. Begin crimping near the tongue end of the lug and continue crimping toward the wire end.
- REQUIRED NUMBER OF COMPRESSIONS SHOWN ON TOOL CHART IN ( ).
- After crimping, inspect for sharp edges, flash or burrs and remove if present.
Tool Chart for Compression Connectors Type S-R with Copper Cable
|
CT-1700➀ |
CT-720 |
CT-810 ④ |
CT-1250 ④ |
CT-2600/L CT-2600/LINT CT-2600/LUK CT-2600/LAUS CT-2600/TO |
A See Tool List Below |
B See Tool List Below |
C See Uni-Die™ Dieless Tools Below |
CT-3980 CT-3980/INT CT-3980/UK CT-3980/AUS CT-3980/TO
Uni-Die™ Dieless Tool |
|||
| Panduit Part Number | Std. Wire Size | Wire Strip Length | Panduit Die Part Number Die Index Number (Number of Crimps) | ||||||||
|
S8 |
#8
AWG |
7/16″ |
P21 (2) | CD-720-1 P21 (1) | 8 AWG
Red (1) |
—- |
KC4-8
Red (1) |
CD-2001-8 P21
(1) |
CD-920-8 P21 (1) |
—- |
STD (1) |
|
S6 |
#6 AWG |
1/2″ |
P24 (2) |
CD-720-1 P24 (1) | 6 AWG
Blue (1) |
—- |
KC4-6
Blue (1) |
CD-2001-6 P24
(1) |
CD-920-6 P24 (1) |
—- |
STD (1)
#4 AWG STR, #2 AWG SOL |
|
S4 |
#4
AWG |
1/2″ |
P29 (2) | CD-720-1 P29 (1) | 4 AWG
Gray (1) |
—- |
KC4-4
Gray (1) |
CD-2001-4 P29
(1) |
CD-920-4 P28 (1) | STD (1) | STD (1) |
|
S2 |
#2
AWG |
5/8″ |
P37 (3) |
CD-720-2 P37 (1) | 2 AWG
Brown (1) |
—- |
KC4-2
Brown (1) |
CD-2001-1 P37
(1) |
CD-920-1 P37 (1) | STD (1) | STD (1) |
| #1
AWG |
5/8″ |
CD-720-2 P37 (1) | 1 AWG
Green (1) |
1 AWG
Green (1) |
KC4-2
Brown (1) |
CD-2001-1 P37
(1) |
CD-920-1 P37 (1) | STD (1) | STD (1) | ||
|
S1/0 |
1/0
AWG |
5/8″ |
—- |
CD-720-2 P42 (1) | 1/0 AWG
Pink (1) |
1/0 AWG
Pink (1) |
KC4-1/0
Pink (1) |
CD-2001-1/0 P42
(1) |
CD-920-1/0 P42
(1) |
STD (1) | STD (1) |
|
S2/0 |
2/0
AWG |
11/16″ |
—- |
CD-720-2 P45 (2) |
—- |
2/0 AWG
Black (2) |
KC4-2/0
Black (2) |
CD-2001-2/0 P45
(2) |
CD-920-2/0 P45
(1) |
STD (1) | STD (1) |
|
S3/0 |
3/0
AWG |
7/8″ |
—- |
CD-720-2 P50 (2) |
—- |
—- |
KC4-3/0
Orange (2) |
CD-2001-3/0 P50
(2) |
CD-920-3/0 P50
(1) |
STD (1) | STD (1) |
|
S4/0 |
4/0
AWG |
15/16″ |
—- |
CD-720-3 P54 (2) |
—- |
4/0 AWG
Purple (2) |
KC4-4/0
Purple (2) |
CD-2001-4/0 P54
(2) |
CD-920-4/0 P54
(1) |
STD (1) | STD (1) |
|
S250 |
250
kcmil |
1-1/16″ |
—- |
CD-720-3 P62 (2) |
—- |
—- |
KC4-250
Yellow (2) |
CD-2001-250 P62
(2) |
CD-920-250 P62
(1) |
STD (1) | STD (1) |
- The CT-1700 crimp die pockets are integrated into the tool frame.
- CD-920 dies can be used with CT-940CH series and CT-2940 series tools with die adapter.
- Rotate gauge selector to the indicated gauge setting
CT-2001, CT-2001/L, CT-2001/LE, CT-2002, CT-2002/L, CT-3001, CT-3001/E, CT-3001/ST, CT-3001/STINT, CT-3001/STUK, CT-3001/STAUS, CT-3001/TO, CT-3001/CCP, CT-3001/CCPINT, CT-3001/CCPUK, CT-3001/CCPAUS, CT-3001/CCPTO
CT-920, CT-920/CV, CT-920CH, CT-920CH/CV, CT-920CH/CCP, CT-930, CT-930CH, CT-930LPCH, CT-940CH➂, CT-2920, CT-2920/CCP, CT-2920/CCPINT, CT-2920/CCPUK, CT-2920/CCPAUS, CT-2920/CCPTO, CT-2930, CT-2930/L, CT2930/LE, CT-2931, CT-2931/ST,
CT-2931/STINT, CT-2931/STUK, CT-2931/STAUS, CT-2931/TO, CT-2931/STCV, CT-2931/STCVINT, CT-2931/STCVUK, CT-2931/STCVAUS, CT-2931/CVTO, CT-2940➂, CT-2940/L➂, CT-2940/LE➂, CT-2940/ST➂, CT-2940/STINT➂, CT-2940/STUK➂, CT-2940/STAUS➂, CT-2940/TO➂
CT-980, CT-980CH, CT-980LPCH, CT-2950, CT-2980, CT-2980/L, CT-2980/LE, CT-2980/ST, CT-2980/STINT, CT-2980/STUK, CT-2980/STAUS, CT-2980/TO, CT-2981
For Instructions in Local Languages and Technical Support: [email protected]
www.panduit.com
E-mail: [email protected]
Phone: 800-777-3300