PAKITE 830 Wireless Type-C HD Extender User Manual

PAKITE 830 Wireless Type-C HD Extender

Dear Customer

Thank you for choosing our products!
For your better use of this product, please read this manual carefully before using ii. This product is for household use only. If there is any malfunction, please repair it in time.

NOTE:

	Type-c port supporting . protocol is required on laptop/smartphone.(Please refer to P3/P4 for specific instructions)
	Please adjust the video output signal of the playback device to 720p or 1080p.
	Please put TX or RX in an open place and keep a distance of 2-3m from the wireless router to avoid signal interference.
	When transmitting PC video and audio signals, some PC operating systems need to set the video and audio signal source output.
	If noise occurs during use, switch the audio setting of the signal output li1iaiii device to stereo output.
	It supports 1 transmitter for wireless transmission and 2-4 receivers. Does not support the use of multiple transmitters in the same environment.
	Transmission distance is about 20-30 meters when there is no other wireless signal interference/obstacles in the operating environment.
	The hue, saturation, and brightness of the picture output by the receiver are different in various TVs, projectors and other equipment. You can adjust the TV HSB parameters according to your preferences.
	Please uses a 5V power adapter, a higher power adapter such as 9V or 12V will damage the product.
We provide a 1-YEAR REPLACEMENT GUARANTEE. Please have your proof of purchase & pie of the defective product available when you contact us.
If the product you received is defective, missing accessories or you need assembly assistance, PLEASE DON’T RETURN IT TO THE STORE and contact our after-sales mailbox directly.
Global after-sales service mailbox: [email protected]

PANEL DESCRIPTION

1. Transmitter (TX) Panel Description
   
2. Receiver(RX) Panel Description
   

INSTALLATION INSTRUCTIONS

1. Transmitter (TX) Installation
   
   
2. Receiver (RX) Installation
   

COMPUTER CONNECTION

1. Use with Computer
   Connect Transmitter (TX) and laptop using Type-C cable

   NOTE Type-c port supporting protocol is required on laptop.

   
   The Receiver (RX) is connected to a TV or projector
   

2. Computer Setting
   
   After entering the computer system, press the Windows key and the letter P key on the keyboard at the same time. The projection menu bar will appear on the right side of the screen, click “Duplicate”.
   

PHONE CONNECTION

1. Use with phone

The Transmitter (TX) does not support charging the phone. It is recommended to use an external USB cable to supply power for long time use.
Connect Transmitter (TX) and phone using Type-C cable

NOTE Cable casting function is required on your phone to enable the transmitter(TX) to transfer properly. In general, the Type-C interface needs to meet the following conditions. Full functional USB3.0 (5Gbps) or above. Support at least one of the DP protocol, HDMI protocol, Thunder Bolt protocol. The above conditions are for reference only, please consult your phone manufacturer for specific support or not.

The Receiver (RX) is connected to a TV or projector

Please Support Environment Protection
Waste electrical products should not be disposed of household wants. Please put them to the recycle facilities. Check with your local authority or retailer for recycling advice!