OmniCore Designs 850008244483 InstaShade XL 4 Person Pop Up Easy Set Up Beach Tent Instruction Manual

OmniCore Designs 850008244483 InstaShade XL 4 Person Pop Up Easy Set Up Beach Tent Instruction Manual

Set Up

1. Lay beach tent flat with easy-up hub upright. Ensure poles are fully extended and spread out.
   
2.  Standing behind the tent, pull the cords up and away from each other. Continue to pull the cords until the upper and lower sections of the hub connet.
   
3. As the hubs get closer to connecting, the resistance will increase and the body of the tent will form. Once secure you will hear the easy-up hub “click” into place.
   
4. For security and stability, stake down the corners of shelter to secure in place. Sand pockets can be filled for additional stability
   
5. IMPORTANT! Once the easy-up hub is in place, tie the drawstring into a bow. This will help to prevent the potential of the tent collaspsing.
   

Take Down

1. Untie the cords and separate the easy-up hub by pushing down the lower hub poles.
   
2. Gently lower down the entire easy-up tent.
   
3. Holding the easy-up hub upright, fold fabric and poles inward towards the hub.
   

Packing the Tent

1. Fold the poles as shown
2. Lay the tent on its side. Gather all poles tightly to the hub to prevent pole damage
3. Bring all excess fabric together and roll tightly towards the easy-up hub
4. Use provided straps to tightly tie the rolled tent
5. Place the tent in storage bag for extended storage