INSTALLATION GUIDE
BE-GMCACA-G2 B.O.O.S.T. Series
Bass Enclosure for the
2017 and Up GMC Acadia
Contents
BE-GMCACA-G2 Boost Aftermarket Subwoofer
Step 1
To install your GMC Acadia BOOST box, you will need to remove the (8) 4mm Allen bolts that hold the subwoofer in the enclosure. Remove the subwoofer.
Step 2
Inside the car, remove the trunk floor. Next remove the plastic cubby on the drivers side. Then remove the foam storage tray.
Step 3
Remove the nut-sert from the bottom of the enclosure with a 6mm allen key.
Step 4
Secure the bracket to the front of the enclosure with the 10mm bolt and washer/lock washer.
Step 5
Place the enclosure with the bracket into the cubby’s location on the exposed threaded studs.
Step 6
Inside of the box will be a factory stub located on the bottom.
Using one of the remaining nuts, thread that to this stud.
Step 7
Using the last nut and washer.
Thread that onto the outer stud and tighten everything into place.
Step 8
Wire the subwoofer in parallel for a final impedance of 2-Ohms. Red wire goes to the red terminal and the black wire goes to the black terminal.
Step 9
Load the subwoofer back into the enclosure. Fasten the 8x Allen bolts. Now it’s time to enjoy you’re new BOOST bass upgrade!
The BOOST subwoofer enclosures are internally wired for a 2 ohm load at the speaker-wire connection terminal. Check to see if your amplifier is optimized to drive this load. The BOOST enclosures feature a NVX VSW 10″ subwoofer and are custom made for optimal performance in a ready-to-install subwoofer system.
Included in the box
1x BOOST enclosure
2x M6-1.0 20mm Nuts
2x M6 Washers
2x M6 Lock Washers
1x M6-1.0 20mm Bolt
1x Bracket
We recommend the installation of the NVX BE-GMCACA-G2 to be performed by a professional that will have the skills and tools to ensure the job is done correctly.
Please follow the steps above to get the best performance out of the NVX BE-GMCACA-G2. Installing and mounting NVX BE-GMCACAG2 improperly can present a serious safety hazard in the event of a collision. If you have any questions regarding installation of this product or an amplifier in this vehicle please feel free to contact NVX directly for further guidance and installation techniques.