Nivada Grenchen Chronomaster Automatic Watch Instruction Manual
Contents
Watch parts
Crown Position
- Manual winding
- Setting the time
Manual winding
- Manual winding
To manually wind the movement twist the crown clockwise approximately 8-9 times and keep wearing .
This an automatic winding movement. with daily wear the movement will wind itself and will not require manual winding. but it is not worn for a certain amount of time, its power reserve (in this model, 41 hours) is exhausted, and the watch stops.
Setting the time
- (1) Crown out to the (2) position
- Turn the crown to set hour and minute hands
- Push back to (1) position
Using the chronograph
THIS MODEL CHRONOGRAPH FEATURES STOPWATCH THAT CAN MEASURE UP TO 60 MINUTES.
- To start the chronograph: Press the upper pusher A The chronograph hands will begin to move.
- To stop the chronograph: Press the upper pusher A again. The chronograph hands will stop and indicate the elapsed time. (Read the elapsed seconds on the large central hand and minutes on the sub-dial in the 3 o’clock position).
- To reset the chronograph: Press the lower pusher B to reset the chronograph. All the chronograph hands will be reset to “0” position.
