MDR7716G Oval Framed Hanging Wall Mirror
Instruction Manual
CARE AND MAINTENANCE
Do not use acids or alkaline cleaning agents. Sharp objects will damage(scratch) the surface. Wipe the surface with a soft cloth(not be too wet).
NOTICE
*Please make sure that you have all parts indicated before you begin assembly of this item
*This item should be assembled on a soft surface to prevent scratching the finish during assembly
Hardware List
| PIECE | DESCRIPTION | PICTURE | QUANTITY |
| A | Plastic drywall anchor |  |
1X |
| B | Metal screw with attached decorative knob |  |
1X |
PREPARATION
Before beginning assembly of product, make sure all parts are present.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time:5 minutes.
Tools Required for Assembly: Pencil, Electric Drill
Step 1
Determine the desired placement of the mirror on the wall. Hold the mirror against the wall and mark the hanging point with a pencil.
Step 2
Drill hole for anchor using 1/8 inch drill bit. Insert anchor into hole using screwdriver until anchor is flush with wall.
Step 3
Insert screw into anchor by holding the knob and turning clockwise.
Step 4
Place ring around extended knob.
