Contents
Neomounts FPMA-LIFT100 Monitor Mount
SPECIFICATIONS
GENERAL
- Min. screen size* 13 inch
- Max. screen size* 27 inch
- Min. weight 0 kg (per screen)
- Max. weight 8 kg (per screen)
- Screen: 1
- VESA pattern: 100×100 mm 75×75 mm
- VESA minimum: 75×75 mm
- VESA maximum: 100×100 mm
FUNCTIONALITY
- Height adjustment: 0 – 17,7 cm
- Type: Fixed
- Adjustment type: Manual
INFORMATION
- Color: Silver
- Warranty: 5 year
- EAN code: 8717371444389
Please note: The inch sizes stated are just an indication, combined with the weight and VESA sizes. The maximum weight and VESA size are absolute restrictions for the products and should not be exceeded.
Description
Neomounts by Newstar Mount Adapter to allow monitor screen height adjustment (0-17,7 cm) – Silver
The Neomounts by Newstar adapter, model FPMA-LIFT100, allows adjusting the height of a flatscreen. This adapter fits all mounts with VESA75 or VESA100. Ideal to combine with wall mounts, desk mounts, and ceiling mounts. Combinations with the keyboard tray are also possible. The height is adjustable from 0 to 17,7 cm. This offers a maximum height range for the best viewing position. The FPMA-LIFT100 is suitable for screens up to 27″ (68 cm). Weight capacity is 8 kg per screen. This product is suitable for screens with a VESA hole pattern of 75×75 or 100×100 mm. Do you have a different (larger) hole pattern, you can solve this with one of our VESA conversion plates. All installation material is included with the product.
Overview
FPMA-LIFT100 NEOMOUNTS BY NEWSTAR HEIGHT
Features
- Suitable for screens between 10″ and 27″ in size, with a maximum weight of 12kg (verify VESA compatibility).
- The height can be adjusted in one (1) cm steps up to fifteen centimeters.
- All VESA sizes between 75x75mm and 100x100mm are compatible (further explanation about VESA in product description)
5 Year Guarantee
With over 20 years of experience, Newstar can offer mounts of the highest caliber. What you pay for is what you get.
Note: Items with electrical plugs are made with American consumers in mind. Because outlets and voltage vary from country to country, this device might need an adapter or converter to be used where you are traveling. Before buying, kindly verify compatibility.
User Support
- Address: Newstar Computer Products Europa B.V. I Wateringweg 62 I 2031 EJ Haarlem I The Netherlands I
- Contact no. +3 1(0)23-5478888
- Support: [email protected]
- Email: www.neomounts.com
Chamber of Commerce 37076185 ( VAT NL805154383B0 1 I BIC RABONL2U I IBAN NL51RABO0375403299)
FAQ’s
The normal Jarvis Monitor Arm’s range of motion requires 3 to 4 inches of room behind the desk in order to be fully utilized. For the Dual Jarvis Monitor Arm to pull the monitors close together over the desktop, there must be at least 7 inches of clearance.
You can increase tension by turning anticlockwise in the direction of the “+” symbol if your monitors are dropping too low.
While installing the monitor, make sure the weight is spread equally. Likewise, you run the chance of getting wounded if the desk isn’t robust enough.
You can reduce stress on your neck and back by looking up while working rather than directly at the monitor by putting the monitor on the wall. It also aids in improving sitting posture for overall enhanced wellness.
The screws for the monitor are missing, but the mounting bracket for the 100mm VESA mounting points ought to include them as well if you are missing any screws.
Flat screens, LCD displays, monitors, and televisions are all attached to a TV or monitor stands using the VESA standard.
By adjusting the monitor’s height, depth, and, in most cases, tilt, a monitor arm enables you to place the screen in the most comfortable position.
By adjusting the monitor’s height, depth, and, in most cases, tilt, a monitor arm enables you to place the screen in the most comfortable position.
Usually, it is secured with a clamp to the back of your desk. As you can see, using a monitor arm gives you the advantage of being able to adjust the distance between your hands, eyes, and the keyboard and your computer screen.
When studs are not available, some of the easiest options to mount a television are with conical or expanding anchors.
The three recognized techniques for producing a mount are dry mounting, wet mounting, and ready mounting.
Most displays can be mounted on a monitor arm in most situations, providing you with a prompt response. On the back of the display, there are the conventional VESA hole designs of 75 x 75 mm or 100 x 100 mm for connection to a monitor arm.
Download this PDF Link: Neomounts FPMA-LIFT100 Monitor Mount Instructions Manual