Contents
MTI Baths 102A Designer Collection Tubs
Product Information
Specifications
- Model: 102A
- Dimensions: 59.75 x 42 x 23.75 inches
- Installation: Freestanding or Alcove
- Capacity: 116 gallons to overflow
- Weight: 150 lbs / 68 kg (Freestanding), 169 lbs / 77 kg (Alcove)
Product Usage Instructions
Installation
The product can be installed in various ways:
- Freestanding: The tub can be installed as a standalone unit.
- Alcove: The tub can be finished on 1, 2, or 3 sides for installation against a wall or in an alcove.
Filling the Tub
Filling the tub to the maximum capacity may require an above-average size or dedicated water heater.
Optional Integral Armrests
The tub allows for optional integral armrests for added comfort.
The Sculpted Finish process does not allow enough space for mounting fixtures on the tub deck. Shown as Air Bath
Electrical Components & Specifications
The tub comes with different hydrotherapy package options:
- GFCI/110V Microbubbles: Requires a 15-amp electrical circuit.
- Air Massage: Requires a heated blower and a 15-amp electrical circuit.
- Microbubbles with Air: Requires a microbubbles pump, heated blower, and a 20-amp electrical circuit.
- Air Massage Elite: Requires a heated blower, chromatherapy, and a 15-amp electrical circuit.
- Microbubbles with Air Elite: Requires a microbubbles pump, heated blower, chromatherapy, and two 15-amp electrical circuits.
| ELECTRICAL COMPONENTS & SPECIFICATIONS | ||
| Hydrotherapy Package | Components Included | GFCI/110V |
| Microbubbles | Microbubbles pump | 1-15 amp |
| Air Massage | heated blower | 1-15 amp |
| Microbubbles with Air | Microbubbles pump, heated blower | 1-20 amp |
| Air Massage Elite | heated blower, chromatherapy | 1-15 amp |
| Microbubbles with Air Elite | Microbubbles pump, heated blower, chromatherapy | 2-15 amp |
| Electrical requirements may change with the addition of optional therapy components. See specific option details or installation information. CSA Certified C/US; B45.5/IAPMO ANSI Z124.1 and ANSI 112.19.7 | ||
See the Installation & Operation Manual for more details. MTI’s Customer Service: Monday-Friday 8am-6pm EST 800-783-8827 or [email protected]
- Options and accessories may be packaged inside the tub crate. Always check packaging before discarding.
- All product measurements are +1/2”.
- Specifications and configurations are subject to change without notice.
- Measurements herein supersede all others published prior to publication date below.
Note: Electrical requirements may change with the addition of optional therapy components. Please refer to specific option details or installation information.
IMPORTANT ORDERING & INSTALLATION INFORMATION
- Before ordering or installing, please consider future access to equipment.
- Unless ordering Sculpted Finish on 4 sides, please include a diagram specifying which sides will need to be finished, along with location of optional tile flange(s).
- Overflow is factory installed for provided toe tap drain.
- When ordering an air bath, the air blower must be remote mounted.
- Microbubbles system components must be installed on a non-Sculpted Finish side. Components will extend beyond the perimeter of the tub. Call MTI for specific details regarding the desired installation before placing the order.
- Radiance placed on floor locations will affect placement of air jets.
- Hydrotherapy equipment may ship loose for remote installation. See package content on the following page for details.
- Faucet valves cannot be installed on this tub model.
- All tubs are compliant with ASTM C 1028-07 coefficient of friction. DoloMatte meets ANSI A137.1/A326.3 coefficient of friction and AS HB198:2014 slip tests.
| Hydrotherapy Packages | Package Contents | Sculpted Finish Sides | Acrylic CXL® | DoloMatte® | ||
| Part # | MSRP | Part # | MSRP | |||
| Soaker | Soaking bath – no jets, pre-leveled foam base, factory installed rectangular overflow with toe tap drain | 4-sides sculpted | S102A4 | $8,545 | S102D4 | $9,625 |
| 3-sides sculpted | S102A3 | $7,900 | S102D3 | $8,845 | ||
| 2-sides sculpted | S102A2 | $6,365 | S102D2 | $7,175 | ||
| 1-side sculpted | S102A1 | $5,990 | S102D1 | $6,665 | ||
| Microbubbles | 1 infusion port, microbubbles pump, pre-leveled foam base, factory installed rectangular overflow with toe tap drain | 4-sides sculpted | n/a | n/a | n/a | n/a |
| 3-sides sculpted | M102A3 | $10,890 | M102D3 | $11,835 | ||
| 2-sides sculpted | M102A2 | $9,355 | M102D2 | $10,165 | ||
| 1-side sculpted | M102A1 | $8,980 | M102D1 | $9,655 | ||
| Air Massage | 20 air jets, heated air blower, pre-leveled foam base, factory installed rectangular overflow with toe tap drain | 4-sides sculpted | AST102A4 | $11,830 | AST102D4 | $12,910 |
| 3-sides sculpted | AST102A3 | $11,185 | AST102D3 | $12,130 | ||
| 2-sides sculpted | AST102A2 | $9,650 | AST102D2 | $10,460 | ||
| 1-side sculpted | AST102A1 | $9,275 | AST102D1 | $9,950 | ||
| Air Massage Elite | 30 air jets, heated air blower, Chromatherapy LED lighting, Spa Mode, pre-leveled foam base, factory installed rectangular overflow with toe tap drain | 4-sides sculpted | AE102A4 | $13,540 | AE102D4 | $14,620 |
| 3-sides sculpted | AE102A3 | $12,895 | AE102D3 | $13,840 | ||
| 2-sides sculpted | AE102A2 | $11,360 | AE102D2 | $12,170 | ||
| 1-side sculpted | AE102A1 | $10,985 | AE102D1 | $11,660 | ||
| Microbubbles with Air Massage | 1 infusion port, microbubbles pump, 20 air jets, heated air blower, pre-leveled foam base, factory installed rectangular overflow with toe tap drain | 4-sides sculpted | n/a | n/a | n/a | n/a |
| 3-sides sculpted | ASTM102A3 | $13,635 | ASTM102D3 | $14,580 | ||
| 2-sides sculpted | ASTM102A2 | $12,100 | ASTM102D2 | $12,910 | ||
| 1-side sculpted | ASTM102A1 | $11,725 | ASTM102D1 | $12,400 | ||
| Microbubbles with Air Massage Elite | 1 infusion port, microbubbles pump, 30 air jets, heated air blower, Chromatherapy LED lighting, Spa Mode, pre-leveled foam base, factory installed rectangular overflow with toe tap drain | 4-sides sculpted | n/a | n/a | n/a | n/a |
| 3-sides sculpted | AEM102A3 | $15,255 | AEM102D3 | $16,200 | ||
| 2-sides sculpted | AEM102A2 | $13,720 | AEM102D2 | $14,530 | ||
| 1-side sculpted | AEM102A1 | $13,345 | AEM102D1 | $14,020 | ||
Microbubbles system components must be installed on a non-Sculpted Finish® side. Components will extend beyond the perimeter of the tub. Call MTI for specific details regarding the desired installation before placing order. For more customized applications, additional hydrotherapies may possibly be integrated in Sculpted Finish® tubs, depending on the types of therapy and the installation application. Visit mtibaths.com or call MTI at 800.783.8827.
RECOMMENDED SENSORY THERAPIES
Chromatherapy
(LE) $800 underwater lighting 2 LED lights included
Audiotherapy
(STEREOBT) $1,390 2 transducers with bluetooth and amplifier (BTREMOTE) $600 bluetooth remote (STEREOH202) $1,575 4 transducers amplifier not included
Thermaltherapy
(RAD100) $1,595 Radiance® 2 heated zones included
For more information on options and accessories go to Acrylic Tub Options on mtibaths.com
| Options Must be ordered at time of purchase. |
| Standard Color White (CWH) gloss Acrylic CXL, matte DoloMatte |
| Textured, Slip-Resistant Bottom (TXTBTM) $105 DoloMatte® exceeds ANSI A137.1/A326.3 and AS HB198 slip tests. |
| Ozonator (OZONE) $515 |
| Integral Armrests – 1 pair (INTARM) $140 end drain tub models |
| Installation Options Must be ordered at time of purchase. |
| Tile Flange Factory Installed rigid ABS 1 Side (TFK1) $175 IMPORTANT: Must specify flange location(s) on order of Factory-Installed Flange. 2 Sides (TFK2) $185 3 Sides (TFK3) $200 Field Install Kit (TFKNI) $185 Includes rigid ABS & adhesive |
| Accessories |
| Pillows from $180 |
| Teak Bath Mat (TKMAT3018) $815 Custom sizes also available. Contact MTI for details and pricing. |
| Teak Tub Tray Slatted (TK-TRAY1) $500 Solid (TK-TRAY2) $570 |
| Teak Seat (TK-REMSEAT) $660 For use with armrests only. |
| Floor-Mounted High-Flow Tub Filler Contemporary Chrome (FILLC) $1,480 Brushed Nickel (FILLBN) $1,710 |
Drains & Overflow Kits Must be ordered at time of purchase
Toe Tap with Rectangular Overflow: PVC Drain Kit Overflow is factory installed
Chrome (WOTRC) included Brushed Nickel (WOTRBNU) substitute free of charge White (WOTRWU) $55 finish upcharge
Brass Body for Rectangular Overflow with Toe Tap
(WOTRSBU) $480 upcharge
Slim-Line Overflow with Toe Tap Drain Must be ordered at time of purchase
- May upgrade rectangular overflow to Slim-Line Overflow
- Low profile overflow is factory installed
- Overflow measures 4.5” x 1”
- Provides a deeper soak
- Not available for commercial applications
Slim-Line Overflow with Toe Tap Drain
- PVC Drain
- Chrome (SLOTC) $500
- Brushed Nickel (SLOTBN) $530
- Polished Nickel (SLOTPN) $555
- White (SLOTW) $430
Slim-Line Overflow with Toe Tap Drain
- Solid Brass Drain
- Chrome (SLOTSBC) $930
- Brushed Nickel (SLOTSBBN) $935
- Polished Nickel (SLOTSBPN) $935
- White (SLOTSBW) $965
Certifications
The product is CSA Certified C/US and meets the standards of B45.5/IAPMO ANSI Z124.1 and ANSI 112.19.7.
Contact Information
For more details, please refer to the Installation & Operation Manual or contact MTI’s Customer Service at 800-783-8827 or [email protected]. Customer Service is available Monday-Friday from 8am-6pm EST.
©2023 by MTI Baths, Inc. Modification Rights Reserved
FAQ
- Q: Can the tub be installed as a freestanding unit?
A: Yes, the tub can be installed as a freestanding model. - Q: What are the dimensions of the tub?
A: The tub has dimensions of 59.75 x 42 x 23.75 inches. - Q: What is the maximum capacity of the tub?
A: The tub can hold up to 116 gallons before overflowing. - Q: What is the weight of the tub?
A: The freestanding tub weighs 150 lbs / 68 kg, while the alcove tub weighs 169 lbs / 77 kg.