Contents
Merra PTL-5026-00-BNHD-1 1-Light Gold Modern Wall Sconce
Product Information
The product is a lamp that requires assembly before usage. It has a mounting bracket, canopy, shade, decorative ring, and socket ring. The lamp holder can accommodate one E26 bulb (not included) up to 60W. It comes with wire nuts, mounting bolts, and a locking nut for secure installation. The product manual provides step-by-step instructions for assembly and usage.
Product Usage Instructions
- Prepare the wiring in your wall for the desired location of your new lamp. Prepare your junction box (not included).
- Unscrew the canopy bolts (D) and take the mounting bracket (B) off the canopy (E). Connect the mounting bracket to your junction box using the mounting bolts (C).
- Make electrical connections using the wire nuts (A).
- Being careful that no wiring is left exposed, place the canopy against the mounting bracket and secure it by replacing the canopy bolts.
- Remove the socket ring (K) from the lamp holder (H). Fit the shade (I) onto the lamp holder and secure it by replacing the socket ring.
- Install your bulb into the socket on the lamp holder. This fixture has been rated for one E26 bulb (not included) up to 60W.
- Connect the slot of the decorative ring (J) to the pole (G) and secure it by tightening the locking nut (F).
- Restore the power, turn on your lamp, and enjoy!
Note: Make sure to follow all instructions carefully and use caution while assembling and installing the lamp. If you have any questions or concerns, please contact us at [email protected].
WARNING
Read these instructions carefully prior to installation.
- Check for electric, gas, and plumbing lines before drilling or consult a professional.
- ALWAYS cut ALL relevant power before installing a lighting fixture and do not restore power to the line until the lamp has been FULLY installed.
- DO NOT use with bulbs exceeding the recommended wattage.
ASSEMBLY
- Prepare the wiring in your wall for the desired location of your new lamp. Prepare your junction box (not included).
- Unscrew the canopy bolts (D) and take the mounting bracket (B) off the canopy (E). Connect the mounting bracket to your junction box using the mounting bolts (C).
- Make electrical connections using the wire nuts (A).
- Being careful that no wiring is left exposed, place the canopy against the mounting bracket and secure it by replacing the canopy bolts.
- Remove the socket ring (K) from the lamp holder (H). Fit the shade (I) onto the lamp holder and secure it by replacing the socket ring.
- Install your bulb into the socket on the lamp holder. This fixture has been rated for one E26 bulb (not included) up to 60W.
- Connect the slot of the decorative ring (J) to the pole (G) and secure it by tightening the locking nut (F).
- Restore the power, turn on your lamp, and enjoy!
CONTACT US
- Thank you for choosing our products! If you have any questions or comments, contact us at [email protected] and we’ll resolve your issue ASAP!
- For a .pdf copy of the latest version of these instructions, use the appropriate app on your smartphone to scan the QR code to the right.
