MEAN WELL LPV-150-12 150W Single Output Switching Power Supply Instruction Manual

Contents

Model	DC Voltage	Rated Current	Rated Power	Line Regulation	Load Regulation	Efficiency	Input Voltage Range	Frequency Range	Dimensions	Weight	More Information
LPV-150-12	12V	10A (0 ~ 10A)	120W	200mVp-p	500ms, 50ms / 230VAC 500ms, 50ms / 277VAC;	87%	180 ~ 305VAC 254 ~ 431VDC	47 ~ 63Hz	191mm x 63mm x 37.5mm (L x W x H)	0.74Kg	Product Manual
LPV-150-15	15V	8A (0 ~ 8A)	120W	200mVp-p	500ms, 50ms / 230VAC 500ms, 50ms / 277VAC;	88%	180 ~ 305VAC 254 ~ 431VDC	47 ~ 63Hz	191mm x 63mm x 37.5mm (L x W x H)	0.74Kg	Product Manual
LPV-150-24	24V	6.3A (0 ~ 6.3A)	151.2W	200mVp-p	500ms, 50ms / 230VAC 500ms, 50ms / 277VAC;	89%	180 ~ 305VAC 254 ~ 431VDC	47 ~ 63Hz	191mm x 63mm x 37.5mm (L x W x H)	0.74Kg	Product Manual
LPV-150-36	36V	4.2A (0 ~ 4.2A)	151.2W	200mVp-p	500ms, 50ms / 230VAC 500ms, 50ms / 277VAC;	89%	180 ~ 305VAC 254 ~ 431VDC	47 ~ 63Hz	191mm x 63mm x 37.5mm (L x W x H)	0.74Kg	Product Manual

To use the LPV-150 series single-output switching power supply, follow these instructions:

Ensure that the input voltage is within the specified range of 180 ~ 305VAC or 254 ~ 431VDC.
Connect the power supply to the desired load using the appropriate wiring.
Make sure the load does not exceed the rated current for the specific model of LPV-150 power supply.
Turn on the input power source.
The power supply will provide a stable DC voltage output according to the selected model.
Monitor the load and ensure it remains within the specified range to prevent overload.
If an overload occurs, the power supply will enter hiccup mode and automatically recover once the fault condition is removed.
In case of an overvoltage or over-temperature condition, the power supply will shut down the output voltage. Once the condition is resolved, the power supply will automatically recover.
Ensure that the working temperature is within the range of -25°C to +65°C. Refer to the derating curve for temperature adjustment guidelines.
Keep the power supply in a well-ventilated environment with a working humidity range of 20% to 90% RH non-condensing.
Store the power supply in a dry and cool place with a temperature range of -40°C to +80°C and a humidity range of 10% to 95% RH.

Constant voltage design
90~132VAC input for LPVL-150
180~305VAC input for LPV-150
Fully encapsulated with IP67 level (Note. 7)
Class II power unit, no FG
Protections: Short circuit/Overload/Over voltage/
Over Temperature
Fully isolated plastic case
Fanless design, cooling by free air convection
100% full load burn-in test
Low cost, high reliability
Listed in UL Sign Component Manual (SAM)
Type “HL” for use in class I, Division 2 hazardous (Classified) location luminaires for LPVL-150
2 years warranty

for Bank type only) (for Bark types only) Suitable for LED-related fixtures or appliances (such as LED Decoration or Advertisement devices)(Note. 10)

GTIN CODE

LPV-150 and LPVL-150 are 150W single-output power supplies that specifically and perfectly work for LED lighting and LED moving sign applications.
As a class II power unit, these two series are housed with the UL 94 V-0 rated flame retardant plastic enclosure. The IP67 design allows every model to fit the use at dry, damp, and wet locations.
Both series are constant voltage mode designs that various models with 12V, 15V, 24V, 36V, and 48V are offered for LPV-150 where as 12V and 24V are provided for LPVL-150.

NOTE

All parameters NOT specially mentioned are measured at 230VAC(115VAC for LVL) input, rated load and 25 C of ambient temperature.
Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0. 1uf & 47uf parallel capacitor.
Tolerance: includes set up tolerance, line regulation and load regulation.
Derating may be needed under low input voltage. Please check the static characteristics for more details.
The power supply is considered as a component that will be operated in combination with final equipment. Since MC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify MC Directive on the complete installation again.
Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.
Suitable for indoor use or outdoor use without direct sunlight exposure.
The ambient temperature derating of 3.5°C/1000m with fanless models and of 5°C/1000m with fan models for operating altitude higher than 2000m(6500ft).
For any application note and I water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LEDEN.pdf
This product is not intended for LED lighting luminaire applications in the EU.(In the EU the LP/PF/XL series are recommended.)

Product Liability Disclaimer: For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx