18L Indoor Kitchen Composter
Kit Instructions
Tap Installation for
18L Indoor Kitchen Composter Kit
18L Indoor Composter
Please use only 1 washer when installing your tap. This should be on the outside of your Indoor Composter. On the inside, the nut will come in contact with the body of your Indoor Composter.
When installing the tap be careful not to strip the thread. When installing it secure the nut in place first and tighten it by turning the tap itself. If you get to a point where they are tight but the tap is not pointing in the correct position, loosen it off, and rotate the nut 1/4 of a rotation. Doing this will result in a different ‘finished tightened‘ position for the tap. You may need to do this a couple of times before you get the correct ‘finished tightened‘ position that allows the tap to point in the right direction.