MAXIM LIGHTING 30746BK LED Outdoor Wall Sconce Instruction Manual

MAXIM LIGHTING 30746BK LED Outdoor Wall Sconce Instruction Manual

ITEM NUMBER: 30746BK
DESCRIPTION: Pagoda Large LED Outdoor Sconce

PLEASE CONSULT AN ELECTRICIAN BEFORE INSTALLATION

LAMPING: LED Integrated 2x11W Vinput: 110-120V

General Lighting

Contents

Read the instructions carefully prior to assembling the product
When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside
Carefully remove all packaging materials and retain for future use.
Keep all hardware parts and packaging out of reach of small children.
Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
Ensure that you have all required contents for complete assembly
Take care when lifting. Assemble the product in close proximity to where you intend to position the item.
Do not over tighten the screws and bolts as this may damage the threads.
Do not let children play with this product.

Risk of suffocation!
Keep anypackaging materials away from children.

Carefully read through the instruction sheet before assembly and using the product.
Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
Do not plug the product in if cord is torn or frayed.

On polished finishes, often using talc powder reduces the appearance of fingerprints and other smudges.
For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, acrylic polish, and wood polish.
Clean with soft cloth and a mild detergent. DO not use abrasive cleaner.
Periodically (every 90 days) make sure that the screws are fully tightened.
Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.

Contents

Before getting,started, ensure the package contains the following components:

A	Fixture	X1
B	Mounting Bracket	X1
C	Wire nuts	X2
D	Bolts L0.63″
E	TriacFor example,LutronDVCL-153PDVCL-300P

Caulk around backplate where fixture meets the wall leave a hole at the bottom to allow water to escape.