LIKA
DIMMER SWITCH
Instructions Manual
FEF: 3276000705062
ADEO Services 135 Rue Sadi Carnot
CS 00001 – 59790 Ronchin – FRANCE
Contents
3276000705062 LIKA Dimmer Switch
 |
 |
 |
|
| MAX | 300 w | 24 w | 100 w |
| MIN | 10 w | 8 w | 8 w |
Translation of the original version of user manual.
 |
 |
SETUP
Cutoff electricity before any operation
- Remove the rotating button by pulling on it.
- Unscrew the nut.
- Pull on the mask, then on the plate.
CONNECTION: Strip wires, length indicated on the product
If necessary open terminal by unscrewing the screw
(4.1) insert the wire(s) then tighten the screw
DISCONNECTION: (4.2) Open terminal by unscrewing the screw then pull on the wire(s)
(5.1) Install the mechanism
(5.2) Position the plate
(5.3) Position the mask
(5.4) Refasten the nut
(5.5) Insert the rotating button.
Please make sure the device is installed on a circuit with a protection device (ex: Circuit Breaker) with a rated current of at least 10A.
*Guarantee 2 years
This product must be set up in compliance with set upregulations, and preferably by a qualified technician. Incorrect setup and use may result in electric shock or fire hazard. Do not open, disassemble, alter, nor modify this appliance
RECYCLING
This product carries the symbol for disposal of Waste Electrical and Electronic Equipment (WEEE).
This means that this product must be disposed of in compliance with the European Directive 2012/19/UE for it to be recycled or disassembled in order to minimize itsimpact on the environment. The user may opt for giving his/her product to a competent recycling agency or to the retailer where the new electric or electronic equipment was purchased.