legrand 4 121 71 Connected Contactor Instruction Manual

legrand 4 121 71 Connected Contactor 
Instruction Manual

Thanks to its control circuit with integrated power and protection, you no longer need to install a circuit breaker 2A to protect the control circuit if you wire a contact between C1 and C2.

For the protection of the Connected Contactor, it is recommended to use a circuit breaker or a gG fuse with current rating ≤ 20A.

(2) Add the Contactor in a connected installation

* In order to restart all connected products at the same time.
**: After wiring the installation, refit the front plate so that no active live part is accessible.

(3) Finalize the installation in the Legrand Home + Control app

Press the configuration button of the Connected Contactor (> 5 seconds) until the configuration indicator lights up in fixed red. It is no longer associated with the gateway present in the installation.

www.legrand.fr/reference/412171

LEGRAND – Pro and Consumer Service – BP 30076
87002 LIMOGES CEDEX FRANCE • www.legrand.com

UE SIMPLIFIED DECLARATION OF CONFORMITY

The undersigned,
Legrand
declares that the radio equipment listed on this instruction sheet
are compliant to the directive 2014/53/UE.
The full text of the UE declaration of conformity
is available at the following website:
www.legrandoc.com