Kensington UH1450P USB-C Mobile Dock Instruction Manual

Register your dock at kensington.com/register

WHAT IS IN THE BOX

INSTALLATION INSTRUCTION

1. Plug the USB-C cable into an available USB-C port on your host device. The selected USB-C port should support both Alt Mode and Power Delivery.
2. Connect accessories and monitors:
   • Connect phones, mice, keyboards, thumb drives, printers, and hard drives using the two USB-A 3.2 Gen2 ports (10Gbps/5V/1.5A and 10Gbps/5V/0.9A) on the back of the dock.
   • Plug your ethernet cable into the 1Gbps Ethernet port for stable high-speed internet/intranet connectivity.
   • Connect monitors using the two DisplayPort 1.4++ ports on the front of the dock.
   • Connect an additional USB-C accessory using the USB-C 3.2 Gen2 port (10Gbps/5V/0.9A) located on the front of the dock.
3. To setup pass-through power:
   • Plug your host device’s USB-C power adapter into the USB-C PD port on the side of the dock.
   • The USB-C power adapter must supply at least 85W of Power Delivery.
4. The dock will deliver:
   • Up to Dual or Single 4K @ 60Hz on Windows devices
   • Up to Dual 4K @ 60 Hz on macOS devices in mirror mode only

   Note: Host must support DP 1.4 for maximum resolutions.

Windows

macOS

• Minimum of 85W PD required from your USB-C power adapter.

For support, visit kensington.com/support