quick start guide BC
WAVE100tws
Contents
WHAT’S IN THE BOX
HOW TO WEAR
- Try different sizes of eartips for best fit and seal.
FIRST TIME USE
POWER ON & CONNECT
DUAL CONNECT
BUTTON COMMAND
| 1. Stereo Mode | 2. Mono Mode |
 |
|
power off
Manual Controls
Connect to a new Bluetooth device
RECONNECT LEFT & RIGHT
RESET
Charging
LEB BEHAVIORS
TECH SPEC
| Model: Driver Size: Power supply: Weight: Earpiece: Charging case: Headset battery type: Charging case battery type: Charging time: Music playtime with BT on: Frequency Response: Impedance: Sensitivity: Maximum SPL: Microphone sensitivity: Bluetooth version: Bluetooth profile version: Bluetooth transmitter frequency range: Bluetooth transmitter power: Bluetooth transmitter modulation: Maximum operation temperature: |
WAVE100TWS 8 mm / 0.31” Dynamic Driver 5 V  1 A46.3 g / 0.102 lbs 5.1 g / 0.011 lbs (10.2 g / 0.022 lbs combined ) 36.1 g / 0.08 lbs Lithium-ion Battery (45 mAh / 3.7 V) Lithium-ion Battery (550 mAh / 3.7 V) 2 hrs from empty up to 5 hrs 20 Hz – 20 kHz 16 ohm 105.5 dB SPL@1kHz 94 dB -11.3 dBV@1 kHz / Pa 5.0 A2DP V1.3 AVRCP V1.6 HFP V1.7 2.4 – 2.4835 GHz < 10 dBm GFSK, π/4-DQPSK, 8-DPSK 45°C |
TO PROLONG BATTERY LIFESPAN, FULLY CHARGE AT LEAST ONCE EVERY 3 MONTHS. BATTERY LIFE VARIES BY USE AND SETTINGS.
IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-JBLV100TWS) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.59W/kg.The device was tested for typical bodily operations where the product was kept 0 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of 0mm between the user›s head and the back of the headset. The use of belt clips, holsters and similar accessories shall not contain metal parts in its assembly. Use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.
Head operation
The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user›s ear and the product including the antenna). Head exposure that do not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.
IC: 6132A-JBLV100TWS
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license.
Other trademarks and trade names are those of their respective owners.
HP_JBL_WAVE100TWS_QSG_Global_SOP_V12