IQxel Next Generation Connectivity Test System Specifications Manual

Contents

IQxel^TM

Next Generation Connectivity Test System

General Technical Specifications

RF Analyzer

RF Analyzer — Signal Trigger

Baseband Analyzer

RF Generator

¹ Automatic Level Control (ALC) enables the internal power detector to be used for power level feedback.

Baseband Generator

Port Isolation

Timebase

Wireless LAN (802.11a/b/g/n/p/ac) Measurement Specifications

Bluetooth^® (1.0, 2.0, 2.1, 3.0) Measurement Specifications

1 IQxel supports testing sensitivity with Dirty Packets

Bluetooth (4.0, 4.1, 4.2) Measurement Specifications

1 NOC and EOC tests are the same except for the operating conditions which do not impact the test equipment requirements

2 External signal source required for these measurements (not LitePoint supplied)

3 IQxel provides the wanted signal only. No interfering signal is available

Bluetooth 5 Measurement Specifications

Bluetooth 5 introduced a couple of new test requirements:

Data Rate: New requirements for testing with 2 Mbps, 1 Mbps, 500 kbps, 125 kbps signal

Stable Modulation: Optional requirement for device to support smaller variation in the frequency deviation during modulation (modulation index between 0.495-0.505). This enhancement gives device stable and better range coverage and thus competitive advantage